Shop headings: New Spares | Used Spares | Accessories | Brands
34 Results - Page 2 of 4
Piston ring set for Nikasil 83mm bores
These can be used with cast iron bores
This part is due back in stock soon, call 01484 841395 to reserve yours
14060655-z 14060655 GU14060655 14 06 06 55
1406 0655 1406.0655 14.06.06.55
£36.00
INC VAT
£30.00 EX VAT
Piston ring set for cast iron 83mm bores
These must not be used with Nikasil bores
Sorry, this part is no longer available.
14060650-z 14060650 GU14060650 14 06 06 50
1406 0650 1406.0650 14.06.06.50
Sorry this item is out of production
88mm piston ring set for cast and Nigusil bore
3 ring set. Only for Cali 1100 frame prefixes KG and KH, for KC and KD prefixes see ENA30660
This part is due back in stock soon, call 01484 841395 to reserve yours
18060601-z 18060601 GU18060601 18 06 06 01
1806 0601 1806.0601 18.06.06.01
£35.30
INC VAT
£29.42 EX VAT
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.
NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722
2 in stock
20391310 GU20391310 20 39 13 10
2039 1310 2039.1310 20.39.13.10
Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)
£20.00
INC VAT
£16.67 EX VAT
Piston for oil pressure relief valve in lower crankcase
This part is due back in stock soon, call 01484 841395 to reserve yours
31150950 GU31150950 31 15 09 50
3115 0950 3115.0950 31.15.09.50
£12.00
INC VAT
£10.00 EX VAT
Rebuild kit for Brembo Radial Calipers with 34mm pistons fitted to the front of these models. Contains seals, brake grease, washers, bleed screw and dust cap. One kit required per caliper.
Caliper seal kit
This part is available by special order, request a quote
£33.00
INC VAT
£27.50 EX VAT
Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.
Caliper seal kit
2 in stock
£34.00
INC VAT
£28.33 EX VAT
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Pair of Ferodo FRP408 brake pads for Brembo 5165 4 piston single pin calipers
We advise checking your front caliper(s) have one not two pad pins.
Ferodo's racing materials have had more wins over the past 50 years than any manufacturer in the world. From the demands of the Isle of Man TT to the circuits of the World Superbike, our organic racing range has provided the performance and modulation required by the world's best riders.
Developed from Ferodo's extensive racing history, unrivalled by any of our competitors
Highest friction level available for motorcycle racing
Developed by world champions for future world champions
Stable friction level achieving excellent modulation
Fast bedding-in period
Applications to fit all major racing calipers
Suitable for stainless steel and cast iron discs
2 in stock
30654602-z 30654602 GU30654602 30 65 46 02
3065 4602 3065.4602 30.65.46.02
£20.50
INC VAT
£17.08 EX VAT