Shop headings: New Spares | Used Spares | Accessories | Brands
Rear hugger finished in gloss black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets
Supplied with brackets, stainless fasteners and fitting instructions
Sorry, this part is no longer available.
Sorry this item is out of production
The SW-Motech EVO footpeg kit offers 36 options for the rider footrest position. The kit contains rotating elements with firmly interlocking teeth which allow you to move the standard position by up to 15mm. The position of the footrest can be adjusted so that it's lower or moved forwards or backwards as well as adjusted in terms of its angle to suit your individual needs. It mounts to the original parts of the footrest holder.
See this link for fitting instructions. Silver painted finish
This part is available by special order, request a quote
£135.00
INC VAT
£112.50 EX VAT
Clever stand which makes working on your bike much easier! This stand clamps safely to the bolts just underneath the rider footrests, and allows you to lift the bike securely in a similar action to a centrestand.
Useful substitute for a centre stand.
Needs 2 x 18mm 0.5 inch drive sockets to fit a V11 (not supplied)
This part is available by special order, request a quote
979717 MG979717
£140.00
INC VAT
£116.67 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.
Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA85433 and V-Twin Boost - ACA85001 or ACA85002.
Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT
Light smoke large touring screen, 230mm taller than the standard screen
230mm taller than the factory screen. Manufactured from 4mm high impact acrylic
Order now and we will post your order within 7 days.
£147.00
INC VAT
£122.50 EX VAT
The SW-Motech EVO footrest kit offers 36 options for the rider footrest position. The kit contains rotating elements with firmly interlocking teeth which allow you to move the standard position by up to 15mm. The position of the footrest can be adjusted so that it's lower or moved forwards or backwards as well as adjusted in terms of its angle to suit your individual needs. It mounts to the original parts of the footrest holder. Improve rider comfort with this quality kit.
See this link for fitting instructions. Silver painted finish
This part is available by special order, request a quote
£148.00
INC VAT
£123.33 EX VAT
This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.
Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.
See installation instructions here.
1 in stock
£149.00
INC VAT
£124.17 EX VAT
Passenger saddle featuring 3D net inserts for optimal ergonomics and long travel comfort.
This part is available by special order, request a quote
2S002031
£149.00
INC VAT
£124.17 EX VAT