Page 26 of 27
Bolt Disc Bolt M8 BRA98460 Fits Le Mans 1, V35 I, V50 I, V50 II Dimensions: M8 x 60mm Bright zinc finish M8 hex head brake disc bolt Rear disc bolt for Le Mans 1-3 models, front disc bolt on Le Mans 1 models. 6 bolts required per disc. Front disc bolt on small twins More than 5 in stock 98052460 GU98052460 98 05 24 60 9805 2460 9805.2460 98.05.24.60 £1.30 INC VAT £1.08 EX VAT
Banjo Brake Light Switch Fine Thread ELA14959 Fits 1100 Sport ALL, Centauro, Daytona (1991-1996), V11 Sport, V35 I, V35 II, V35 3, V35 Florida, V35C, V50 I, V50 II, V50C, V50 3, Monza, V65, V65 Florida, V65 GT, Lario, Quota ALL, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, SP II, Spada 3, S3, T3, T4, T5, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Strada 1000, Nevada 750 (1991-2003) Dimensions: M10 x 1 x 17mm bolt, 18mm from end to underside of bolt head Brakelight switch banjo bolt See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050 This part is due back in stock soon, call 01484 841395 to reserve yours 14657959 GU14657959 14 65 79 59 1465 7959 1465.7959 14.65.79.59 £21.00 INC VAT £17.50 EX VAT Banjo Bolt Kit M10 With Bleed Nipple BRA01006 Universal Part Dimensions: M10 x 1 Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt More than 5 in stock Also fits Benelli 250 TS £21.00 INC VAT £17.50 EX VAT
Automatic Bleed Valve M8 Bleed Nipple BRA41654 Fits Breva 750, Nevada 750 (1998-2016), V7 Classic, V7 Cafe, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone Dimensions: M8 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover. Fits front calipers only on models listed above. 2 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M6 Bleed Nipple BRA41651 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT,Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL Dimensions: M6 x 16mm The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed. - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover More than 5 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve M10 Single Banjo Bolt BRA41653 Universal Part Dimensions: M10 bolt with M6 bleed nipple The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:
- Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover 1 in stock
£33.00 INC VAT £27.50 EX VAT
Automatic Bleed Valve M10 Bleed Nipple BRA41650 Fits Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL Dimensions: M10 x 1 The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! - Completely sealed by O-ring.
- Hydraulic system remains sealed even during the venting process.
- Reliable non-return function on this auto bleed valve, thus one-man operation.
- System has been bled in minutes.
- Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
- For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
- Tested under extreme conditions by TÜV Rheinland.
See BRA41652 for bleed valve cover 3 in stock
£26.50 INC VAT £22.08 EX VAT
Automatic Bleed Valve Cover BRA41652 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT Dimensions: 9.5mm ID x 16mm overall height Black cover or cap for Stahlbus M6 bleed valve. Prevents contamination of the valve and smartens up your brake caliper 4 in stock £5.70 INC VAT £4.75 EX VAT
Aluminium Master Cylinder Cap PS15 Brembo BRA14102 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750, 850T, V7 Sport, 750S, S3 Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal Make your Guzzi stand out from the crowd! This part is available by special order, request a quote 14661100 GU14661100 14 66 11 00 1466 1100 1466.1100 14.66.11.00 Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR £32.50 INC VAT £27.08 EX VAT Aluminium Master Cylinder Cap PS12 Brembo BRA14103 Fits S3, Convert, G5, Cali 2, Le Mans 1, Le Mans 2, Le Mans 3, T3, T4, V35 II, V50 3, V65 ALL, V75 (4 Valves Per Cylinder), 750 SP, 750 Targa, Strada 750, NTX 350, V35 II, V35 Florida, Cali EV, Cali Jackal, Nevada (1991 - 2003), Cali 1100 (Frame Nos KC12446 - KD12178), Cali Stone, 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL, Quota 1100, Stelvio, Bellagio Dimensions: 53mm OD Gorgeous polished aluminium reservoir cap for PS12 Brembo master cylinder fitted to front brake on many models, fits rear master cylinder on more recent models Make your Guzzi stand out from the crowd! This part is available by special order, request a quote 10430830 GU10430830 10 43 08 30 1043 0830 1043.0830 10.43.08.30 £32.50 INC VAT £27.08 EX VAT Page 26 of 27
|