Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
227mm vertical screen mounting centres
Black screen fitting kit consisting of two arms and all necessary bolts and washers. For fitting larger screens (e.g. FAA29250)
Not suitable for mounting small screen FAA60061 (use kit FAA60022A instead) or EV screen FAA60130
This part is available by special order, request a quote
£78.00
INC VAT
£65.00 EX VAT
Dimensions:
350mm tall
Lightly smoked screen for headlamp fairing
Lightly tinted original screen, supplied drilled
This part is available by special order, request a quote
19577265-z 19577265 GU19577265 19 57 72 65
1957 7265 1957.7265 19.57.72.65
£78.00
INC VAT
£65.00 EX VAT
Dimensions:
640mm tall, 520mm wide
Italian made tall clear screen for late Norge 1200
This part is available by special order, request a quote
£78.00
INC VAT
£65.00 EX VAT
Dimensions:
510mm from above headlamp to top of screen, 580mm wide at widest point, 200mm vertical centres between mounting holes
Large clear touring screen. Uses 4 mounting points
Fitting kit no longer available
This part is available by special order, request a quote
135772450010
£78.00
INC VAT
£65.00 EX VAT
Dimensions:
227mm vertical mounting centres, 700mm at widest point, 470mm from above headlamp to top edge
Large tinted screen with chrome edging
Use fitting kit FAA60008.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike.
Note that due to the tight radius of the chome trim the finish may not be perfectly smooth
1 in stock
29577350 GU29577350 29 57 73 50
2957 7350 2957.7350 29.57.73.50
£77.20
INC VAT
£64.33 EX VAT
Dimensions:
260mm vertical mounting centres, 510mm wide at widest point, 375mm tall from above headlamp to top of screen.
Clear standard Screen, uses standard mounting points
Fitting kits no longer available , the screen mounts are at different spacings to screens for earlier Cali 1100s.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike
This part is available by special order, request a quote
03575130-z 03575130 GU03575130 03 57 51 30
0357 5130 0357.5130 03.57.51.30
£75.00
INC VAT
£62.50 EX VAT
Right hand side panel (battery cover) in GRP ready for priming and painting
Mounting rubbers available separately. This is a reproduction part which may differ slightly from the original item
This part is available by special order, request a quote
23476210-z 23476210 GU23476210 23 47 62 10
2347 6210 2347.6210 23.47.62.10
£72.00
INC VAT
£60.00 EX VAT
Left hand side panel (battery cover) in GRP ready for priming and painting
Mounting rubbers available separately. This is a reproduction part which may differ slightly from the original item
This part is available by special order, request a quote
23476310-z 23476310 GU23476310 23 47 63 10
2347 6310 2347.6310 23.47.63.10
£72.00
INC VAT
£60.00 EX VAT
Left hand bare replica side panel or battery cover ready for priming and painting. Fabricated in fibreglass with steel clips for the top mounting points
This is a replica part, there may be minor differences between this part and the original Moto Guzzi part. Side panel rubbers FRA39461 and FRA91551 available separately
1 in stock
14476350-z 14476350 GU14476350 14 47 63 50
1447 6350 1447.6350 14.47.63.50
£70.00
INC VAT
£58.33 EX VAT
Dimensions:
225mm lower edge to top lip
Smoked fairing screen, flip edge
May come with or without mounting holes- you may need to drill these before fitting
This part is available by special order, request a quote
28577250 GU28577250 28 57 72 50
2857 7250 2857.7250 28.57.72.50
£70.00
INC VAT
£58.33 EX VAT
Secure online shopping 
