The SW-Motech EVO footrest kit offers 36 options for the rider footrest position. The kit contains rotating elements with firmly interlocking teeth which allow you to move the standard position by up to 15mm. The position of the footrest can be adjusted so that it's lower or moved forwards or backwards as well as adjusted in terms of its angle to suit your individual needs. It mounts to the original parts of the footrest holder. Improve rider comfort with this quality kit.

See this link for fitting instructions. Silver painted finish

 This part is available by special order, request a quote

Black steel centre stand without springs or brackets

Brackets, bushes and springs available separately.
Note that as with the original stand the lugs on this stand are only intended for pushing the stand to the ground and are not stong enough to lever your bike onto the stand. You should put your foot onto the foot of the stand to rock the bike back and up on to it

 Sorry, this part is no longer available.

17430345-z 17430345 GU17430345 17 43 03 45
 1743 0345 1743.0345 17.43.03.45

Centre stand finished in black, supplied without springs or fitting hardware

This stand has the narrow foot spacing so will not fit later California models with wider rear wheels

 Sorry, this part is no longer available.

 29430300 GU29430300 29 43 03 00
 2943 0300 2943.0300 29.43.03.00

Foot brake pedal supplied without rubber or peg

Rubber FRA81212 fits this pedal

 This part is available by special order, request a quote

2B005634

The SW-Motech EVO footpeg kit offers 36 options for the rider footrest position. The kit contains rotating elements with firmly interlocking teeth which allow you to move the standard position by up to 15mm. The position of the footrest can be adjusted so that it's lower or moved forwards or backwards as well as adjusted in terms of its angle to suit your individual needs. It mounts to the original parts of the footrest holder.

See this link for fitting instructions. Silver painted finish

 This part is available by special order, request a quote

Rear crash bar set, bright chrome finish

 This part is available by special order, request a quote

29458251-Z

Pair of front crash bars in chome

Engine bars - essential protection for your bike. For fixings use 2 x SSA10045 and 2 x SSA08116

 This part is available by special order, request a quote

 19450200 GU19450200 19 45 02 00
 1945 0200 1945.0200 19.45.02.00

These clever spacers allow the fitting of the taper roller head bearings which are standard on later small twins in place of the often damaged and fiddly OE ball bearing races.The taper roller bearings last much longer and are easily replaced unlike the ball bearing races

This part consists of 2 x taper roller adapters and a pair of taper roller bearings, depending on the condition of your stem it may be necessary to shim the taper roller bearings. You may find that extra headlamp rubbers SUA39701 are required to take up the extra distance between the top and bottom yoke on the fork stanchions. See The Shed for instructions.

 Sorry, this part is no longer available.

 39515000 GU39515000 39 51 50 00
 3951 5000 3951.5000 39.51.50.00

Complete cast side stand kit with springs, pivots and mounting brackets finished in black. This kit is supplied with two sidestand brackets so you can mount the stand in either the standard position under the riders footpeg, or in the forward position on the engine mounting bolt (for a Le Mans style getaway).

This stand is supplied ready for fitting in the forward position, swap supplied brackets and spring brackets to mount in the rear position under the rider's footpeg

Bolts to either engine mounting bolt at front of lower framerail (check that you have a long enough front engine mounting bolt for this sidestand to fit on to) or the lower frame rail. This can be fitted to other Tonti frame models with footpegs (e.g. Le Mans 2, Le Mans 3, T3, T4).
Requires final paint finish before fitting. Supercedes Guzzi ref. 28432161

 Availability varies on this part, check availability

 28432160 GU28432160 28 43 21 60
 2843 2160 2843.2160 28.43.21.60

The SW-Motech EVO footpeg kit offers 2 options for the rider footrest position; standard or 15mm lower. This reasonably priced ION footrest kit allows the footrests to be mounted at its original height or lowered by 15 mm. Extremely durable and built to last, these stainless-steel footrests provide plenty of extra grip and are recommended for adventure, offroad and urban motorcycles. Hinges made from high-strength aluminum alloy ensure that the footrest can fold out of the way if the bike tips over. The removable rubber top surface reduces vibration, and the profile gives you a firm grip during offroad riding. To mount the bike-specific hinge adapter to the footrest sockets, the original attachments (springs, bolts, etc.) are used.

See https://mi.sw-motech.com/4052572039182/en for fitting instructions. Silver painted finish

 This part is available by special order, request a quote