Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
1450mm outer length, 95mm free length, 9.9mm barrel nipple, 9.1mm barrel nipple
Clutch cable
This part is available by special order, request a quote
29093071 GU29093071 29 09 30 71
2909 3071 2909.3071 29.09.30.71
£31.00
INC VAT
£25.83 EX VAT
Chrome bar end mirror with a large round head and adjustable arm. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Can be fitted on either left or right hand side of handlebars. Shown here fitted to a handlebar which is not included
1 in stock
£30.90
INC VAT
£25.75 EX VAT
Small round left hand bar end mirror finished in black. Knuckle allows adjustment of mirror. Fits all models with open ended (i.e. not threaded) 7/8 inch steel handlebars.
Perfect for achieving that minimal look on your bike
Availability varies on this part, check availability
£30.90
INC VAT
£25.75 EX VAT
Oil temperature sensor
See ELA03330 for sensor support
1 in stock
29724961 GU29724961 29 72 49 61
2972 4961 2972.4961 29.72.49.61
£30.00
INC VAT
£25.00 EX VAT
37mm exhaust valve
Also known as Guzzi ref. 03036100
1 in stock
14036150 GU14036150 14 03 61 50
1403 6150 1403.6150 14.03.61.50
£30.00
INC VAT
£25.00 EX VAT
Throttle cable
We advise you to measure your existing cable before ordering in case you have a non standard set up.
This part is available by special order, request a quote
30117525 GU30117525 30 11 75 25
3011 7525 3011.7525 30.11.75.25
£30.00
INC VAT
£25.00 EX VAT
Clutch pushrod
This part is due back in stock soon, call 01484 841395 to reserve yours
14085700 GU14085700 14 08 57 00
1408 5700 1408.5700 14.08.57.00
£30.00
INC VAT
£25.00 EX VAT
Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder
NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060
1 in stock
£29.50
INC VAT
£24.58 EX VAT
Needle roller bearing for oil pump
This part is available by special order, request a quote
92252210 GU92252210 92 25 22 10
9225 2210 9225.2210 92.25.22.10
£29.20
INC VAT
£24.33 EX VAT
Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts
This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110
See BRA10310 for less expensive replica kit
More than 5 in stock
14659000 GU14659000 14 65 90 00
1465 9000 1465.9000 14.65.90.00
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£29.00
INC VAT
£24.17 EX VAT