Shop headings: New Spares | Used Spares | Accessories | Brands
Pair of organic EBC FA256 rear brake pads
Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248
2 in stock
AP8133798
£19.30
INC VAT
£16.08 EX VAT
Dimensions:
10mm bleed nipple, 15mm from under flats to base of tip
Brembo M10 bleed nipple kit containing M10 bleed nipple and rubber cap. M10 bleed screw used only on rear of 2003 on models
Brembo no. 98.8249.20
This part is available by special order, request a quote
17659260 GU17659260 17 65 92 60
1765 9260 1765.9260 17.65.92.60
£16.60
INC VAT
£13.83 EX VAT
Dimensions:
29mm x 24mm x 12mm excluding switch and spade connectors
Brakelight switch
Stop light switch also known as Guzzi ref. AP8224192
See FRA98412 for mounting screw
3 in stock
03749845-z 03749845 GU03749845 03 74 98 45
0374 9845 0374.9845 03.74.98.45
£15.50
INC VAT
£12.92 EX VAT
Dimensions:
1 litre
One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area.
See BRA99014 for high performance alternative
More than 5 in stock
£13.75
INC VAT
£11.46 EX VAT
Dimensions:
99cm x 5mm x 8mm
99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Dimensions:
Length 57mm
Brake pad spring for single pin Brembo Goldline 30/34 calipers
Also suitable for some Ducati / Aprilia models. Brembo ref. 98.8248.50
1 in stock
20419685 GU20419685 20 41 96 85
2041 9685 2041.9685 20.41.96.85
£12.00
INC VAT
£10.00 EX VAT
Dimensions:
49cm x 5mm x 8mm
49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir
Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I
More than 5 in stock
£8.80
INC VAT
£7.33 EX VAT
Dimensions:
M10 x 1
Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers
Supplied with 4 crush washers. Also known as Guzzi ref. 95990033
2 in stock
95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28
Also fits Laverda Jota
£8.40
INC VAT
£7.00 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats
Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models
Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.
5 in stock
£8.20
INC VAT
£6.83 EX VAT
Dimensions:
500ml
500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis
Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.
See BRA99013 for high performance alternative.
If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650
Please note this part CANNOT be posted outside of the UK mainland area
More than 5 in stock
£7.92
INC VAT
£6.60 EX VAT
Secure online shopping 
