Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

 5 in stock

Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.

Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap

 More than 5 in stock

Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head

Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 More than 5 in stock

 887483 MG887483

Brilliant chrome, aluminium and metal polish.

Make your Guzzi gleam.

 1 in stock

A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

 4 in stock

 01659230 GU01659230 01 65 92 30
 0165 9230 0165.9230 01.65.92.30

Handy 70g tube of copper grease anti-seize paste

Use to prevent threaded studs, nuts and bolts form seizing

Please note this part CANNOT be posted outside of the UK mainland area

 This part is due back in stock soon, call 01484 841395 to reserve yours

Titanium shouldered retaining screw for rocker cover. 4 required for each big twin cylinder head, 3 per head on small twins. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer on CARC models and ENA06716 for sealing washer on other models

 More than 5 in stock

 842291 MG842291

Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)

 More than 5 in stock

Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.

See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636

 More than 5 in stock

1A003632R

Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro

Stainless steel after market exhaust stud

M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.

 More than 5 in stock

 96506042 GU96506042 96 50 60 42
 9650 6042 9650.6042 96.50.60.42