1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Aluminium crush washer, various applications eg. oil and breather lines, drive box breather and drain on V11 Sport

Can be used instead of SIA90120 (Breva, Griso etc... bevel box fill plug)

 More than 5 in stock

 12006400 GU12006400 12 00 64 00
 1200 6400 1200.6400 12.00.64.00

M10 crush washer used for sump (small twins, V11 Sport), gearbox and drive box level and drain plugs. Also used for lower fork damper retaining bolt washer. Used for sump drain on Breva 1100, 1200, Griso etc...

Also known as Guzzi ref. 25656100, 01528930, AP9150472, 95100309, 887879, 25656102, 486075, AP8163091
These may be supplied as either aluminium or copper crush washers

 More than 5 in stock

 10528900 GU10528900 10 52 89 00
 1052 8900 1052.8900 10.52.89.00

Aluminium crush washer for large sump drain and filler plugs (big twins)

We advise changing this at every oil change. Can be used in place of Guzzi ref. 90714195

 More than 5 in stock

 95100709 GU95100709 95 10 07 09
 9510 0709 9510.0709 95.10.07.09

M8 crush washer used for cylinder head oil lines and other applications, supplied in aluminium or copper

Can be used in place of copper crush washer 856046

 More than 5 in stock

 12154200 GU12154200 12 15 42 00
 1215 4200 1215.4200 12.15.42.00

Sealing washer with rubber insert used for head oil feed pipes

 More than 5 in stock

 976597 MG976597

Drive box filler crush washer

We advise changing this at every oil change. This may be supplied as a copper or aluminium crush washer, both are equally effective. Also known as Guzzi ref. 224566

 More than 5 in stock

 90718120 GU90718120 90 71 81 20
 9071 8120 9071.8120 90.71.81.20