Pair of organic EBC FA244 front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers)

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 More than 5 in stock

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

Pair of sintered EBC FA256 HH rear brake pads

High performance sintered pads with twin pin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8133798

Brembo pad pin kit for Brembo P4 30/34F calipers fitted to front forks, two pins

Brembo ref. 120394230

 1 in stock

 01659130 GU01659130 01 65 91 30
 0165 9130 0165.9130 01.65.91.30

Pad pin kit fitted to rear, double pin.

Incorrectly listed in Guzzi parts books as 31659181 for the V7 II, V7 III , V7 850 and V85TT. This two pin kit is the correct part for the rear caliper on these models.

 1 in stock

AP8133799

Also fits Aprilia Mana 850

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

 1 in stock

Pair of sintered EBC FA244HH front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers). Sintered pads offer improved braking performance but will wear your discs more quickly than organic pads

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 3 in stock

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

 1 in stock

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   1 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Polished aluminium handlebar brake lever for Brembo master cylinder

Supercedes Guzzi ref. 856048

 This part is available by special order, request a quote

 896346 MG896346