Speedo sensor on ABS equipped models, used for front and rear applications depending on model

Used as rear wheel ABS sensor on V85TT, front and rear sensor on V7 II ABS equipped models. There are several variants of these sensors, please compare to the sensor on your bike or contact us with a chassis number before ordering. Supercedes Guzzi ref. 6429875. 2 pin connector

 This part is due back in stock soon, call 01484 841395 to reserve yours

 859792 MG859792

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance.

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping! This banjo bolt can be used in place of a standard fine thread M10 banjo bolt. Supplied with crush washers. We recommend fitting one of these brake valves per caliper
The innovative stahlbus vent valve allows you to change the brake fluid easily and without help. Clean, totally safe and fast !
This auto bleed valve combines all these advantages:

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   This part is due back in stock soon, call 01484 841395 to reserve yours

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems

These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt

 More than 5 in stock

Also fits Benelli 250 TS

A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models

Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230

 4 in stock

 01659230 GU01659230 01 65 92 30
 0165 9230 0165.9230 01.65.92.30

Brembo rubber bleed nipple cap without retaining ring

 More than 5 in stock

Complete 320mm floating front brake disc including bobbins and rotor, compatible with ABS systems

We recommend that you always purchase new pads with your new rotors.Use disc bolt BRA81286. Always fit new brake pads when replacing a brake disc - see BRA01653

 This part is due back in stock soon, call 01484 841395 to reserve yours

 883688 MG883688

Also fits Aprilia AF1 Futura (1990-1992), Aprilia 125 Extrema (1997-), Aprilia125 MX (2004-2007), Aprilia 125 RS (1989-1997), Aprilia 125 Tuono (2004-2005), Aprilia 650 Pegaso Strada (2005-2009), Aprilia 750 Dorsoduro (2008-), Aprilia 750 Shiver (2007-), Aprilia 850 Mana (2007-), Aprilia RSV 1000 (1998-), Aprilia SL Falco (2000-2004), Aprilia Tuaono (2003-), Aprilia 1200 Dorsoduro ABS (2011-), Aprilia 1200 Shiver GT ABS (2009-), Benelli 899 Century Racer, KTM 625 SXC/SMC, KTM 640 Duke, KTM 640 LC4, KTM 690 SM (2007-), KTM 690 SM Prestige (2007-), KTM 690 SMC, KTM 990 Super Duke, Bimota BB 1 SUPERMONO (1995-1996), Bimota BB 1 SUPERMONO Biposto (1996-1997), Bimota DB 2 (1993-1995), Bimota DB 3 Mantra (1995-1998), Bimota DB4 (1998-1999), Bimota DB5 (2005-), Bimota DB6 Delirio (2006-), Bimota SB 6 (1994-1996), Bimota SB 6 R (1997-1998), Bimota SB 8 R (1998-), Bimota V-DUE (1997-2000), Bimota YB 7/J (1988-1989), Bimota YB 10 BIPOSTO (1992-1993), Cagiva 125 Mito), Cagiva 125 Planet (1997-), Cagiva 125 Super City), Cagiva 500 River), Cagiva 600 River (1995-), Ducati 350 SS (1991-1992), Ducati 400 SS (1993-1993), Ducati 600 SS (1994-1998), Ducati 620 Multistrada (2002-2004), Ducati 620 Sport (2003-), Ducati 748 Biposto (1995-1997), Ducati 748 R (2001-2002), Ducati 748 S (2000-2002), Ducati 748 SP (1995-1997), Ducati 748 SPS/R (1998-2000), Ducati 750 SS Nuda (1991-2002), Ducati 800 SS (2003-), Ducati 851 (1989-1994), Ducati 888 (1990-1993), Ducati 900 Sport (2002-2002), Ducati 900 SS (1991-2002), Ducati 900 SS Nuda (1991-1991), Ducati 900 SS Superlight (1992-1994), Ducati 907 Paso i.e. (1991-1992), Ducati 916 (1994-1998), Ducati 916 (955), Corsa (1995-1995), Ducati 916 (996), (1997-2000), Ducati 916 Biposto (1994-1998 Ducati 916 S (1994-), Ducati 916 Senna (1995-), Ducati 916 SP (1994-), Ducati 996 R (2001-), Ducati 996 S (2001-), Ducati 998 (2002-2005), Ducati 998 R Testastretta (2002-2002), Ducati 998 S (2002-2002), Ducati 1000 SS (2003-2006), Ducati GT 1000 (2006), Ducati GT Touring 1000 (2009-), Ducati Monster 600 ALL (1994-2001), Ducati Monster 620 Dark (2002-), Ducati Monster 620 i.e (2002-2006), Ducati Monster 696 (2008-2009), Ducati Monster 750 (1996-2001), Ducati Monster 800 S (2003-), Ducati Monster 900 (1993-2002), Ducati Monster 900 S (1998-2001), Ducati Monster 1000 (2002-2005), Ducati Monster S 2 R 1000 (2006-2007), Ducati Monster S 4 (2001-2003), Ducati Monster S 4 R (2003-2008), Ducati ST 2 (1997-2002), Ducati ST 4 (1999-2000), Ducati ST 4 S (2001-2003), Gilera 125 GFR (1993-), Laverda 650 Ghost (1998), Laverda 668 (1997-1997), Laverda 750 Formula (1998-2002), Laverda 750 Ghost Strike (1998), Laverda 750 Sport (2000-2001), Mondial 999 (2003-), Moto Morini 998 (2006-), Moto Morini 1200 (2005-), MZ 1000S, Voxan 1000 (2000-)

Complete rear brake disc for spoked wheel

Always replace brake pads when fitting new brake discs, see BRA89505 for disc bolts

 1 in stock

 887448 MG887448

Brembo Serie Oro stainless steel complete 320mm floating front brake disc including bobbins and black rotor. These Serie Oro discs are thicker than the OE discs and less prone to warping.

These floating rotors use stainless steel for the braking surface, mated to a lightweight hub cast from aluminum by way of 10 drive pins. These Gold Series brake rotors are 100% interchangeable with the OEM rotors that came on your bike. Suitable for ABS models, this disc includes threaded holes for mounting the ABS ring.

We recommend that you always purchase new pads with your new rotors.Use disc bolt BRA81286. Always fit new brake pads when replacing a brake disc - see BRA01653

 This part is due back in stock soon, call 01484 841395 to reserve yours

37613305-z 37613305 GU37613305 37 61 33 05
 3761 3305 3761.3305 37.61.33.05

Also fits Aprilia AF1 Futura (1990-1992), Aprilia 125 Extrema (1997-), Aprilia125 MX (2004-2007), Aprilia 125 RS (1989-1997), Aprilia 125 Tuono (2004-2005), Aprilia 650 Pegaso Strada (2005-2009), Aprilia 750 Dorsoduro (2008-), Aprilia 750 Shiver (2007-), Aprilia 850 Mana (2007-), Aprilia RSV 1000 (1998-), Aprilia SL Falco (2000-2004), Aprilia Tuaono (2003-), Aprilia 1200 Dorsoduro ABS (2011-), Aprilia 1200 Shiver GT ABS (2009-), Benelli 899 Century Racer, KTM 625 SXC/SMC, KTM 640 Duke, KTM 640 LC4, KTM 690 SM (2007-), KTM 690 SM Prestige (2007-), KTM 690 SMC, KTM 990 Super Duke, Bimota BB 1 SUPERMONO (1995-1996), Bimota BB 1 SUPERMONO Biposto (1996-1997), Bimota DB 2 (1993-1995), Bimota DB 3 Mantra (1995-1998), Bimota DB4 (1998-1999), Bimota DB5 (2005-), Bimota DB6 Delirio (2006-), Bimota SB 6 (1994-1996), Bimota SB 6 R (1997-1998), Bimota SB 8 R (1998-), Bimota V-DUE (1997-2000), Bimota YB 7/J (1988-1989), Bimota YB 10 BIPOSTO (1992-1993), Cagiva 125 Mito), Cagiva 125 Planet (1997-), Cagiva 125 Super City), Cagiva 500 River), Cagiva 600 River (1995-), Ducati 350 SS (1991-1992), Ducati 400 SS (1993-1993), Ducati 600 SS (1994-1998), Ducati 620 Multistrada (2002-2004), Ducati 620 Sport (2003-), Ducati 748 Biposto (1995-1997), Ducati 748 R (2001-2002), Ducati 748 S (2000-2002), Ducati 748 SP (1995-1997), Ducati 748 SPS/R (1998-2000), Ducati 750 SS Nuda (1991-2002), Ducati 800 SS (2003-), Ducati 851 (1989-1994), Ducati 888 (1990-1993), Ducati 900 Sport (2002-2002), Ducati 900 SS (1991-2002), Ducati 900 SS Nuda (1991-1991), Ducati 900 SS Superlight (1992-1994), Ducati 907 Paso i.e. (1991-1992), Ducati 916 (1994-1998), Ducati 916 (955), Corsa (1995-1995), Ducati 916 (996), (1997-2000), Ducati 916 Biposto (1994-1998 Ducati 916 S (1994-), Ducati 916 Senna (1995-), Ducati 916 SP (1994-), Ducati 996 R (2001-), Ducati 996 S (2001-), Ducati 998 (2002-2005), Ducati 998 R Testastretta (2002-2002), Ducati 998 S (2002-2002), Ducati 1000 SS (2003-2006), Ducati GT 1000 (2006), Ducati GT Touring 1000 (2009-), Ducati Monster 600 ALL (1994-2001), Ducati Monster 620 Dark (2002-), Ducati Monster 620 i.e (2002-2006), Ducati Monster 696 (2008-2009), Ducati Monster 750 (1996-2001), Ducati Monster 800 S (2003-), Ducati Monster 900 (1993-2002), Ducati Monster 900 S (1998-2001), Ducati Monster 1000 (2002-2005), Ducati Monster S 2 R 1000 (2006-2007), Ducati Monster S 4 (2001-2003), Ducati Monster S 4 R (2003-2008), Ducati ST 2 (1997-2002), Ducati ST 4 (1999-2000), Ducati ST 4 S (2001-2003), Gilera 125 GFR (1993-), Laverda 650 Ghost (1998), Laverda 668 (1997-1997), Laverda 750 Formula (1998-2002), Laverda 750 Ghost Strike (1998), Laverda 750 Sport (2000-2001), Mondial 999 (2003-), Moto Morini 998 (2006-), Moto Morini 1200 (2005-), MZ 1000S, Voxan 1000 (2000-)

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

 More than 5 in stock

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

 More than 5 in stock