Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
350mm mounting centres, 12mm ID bushes, 46mm OD spring
Pair of YSS rear shock absorbers, milled aluminium body with black springs.
Continuous preload adjustment, fully rebuildable
This part is available by special order, request a quote
£210.00
INC VAT
£175.00 EX VAT
Dimensions:
21mm x 26mm x 6.5mm
Split mudguard grommet for tail light mount
More than 5 in stock
91551099 GU91551099 91 55 10 99
9155 1099 9155.1099 91.55.10.99
£2.40
INC VAT
£2.00 EX VAT
Rear hugger finished in gloss black, this will protect your rear shock from road spray and grit. Mounts via three pre drilled holes and supplied brackets
Supplied with brackets, stainless fasteners and fitting instructions
Sorry, this part is no longer available.
Sorry this item is out of production
Dimensions:
120mm overall length
Protective spring for brake fluid supply line joining rear fluid reservoir to rear brake master cylinder
2 in stock
30665860 GU30665860 30 66 58 60
3066 5860 3066.5860 30.66.58.60
£1.40
INC VAT
£1.17 EX VAT
Replacement clutch plate for single plate RAM clutches
Torque setting for fitting this is 25Nm with a thread locking compound
This part is available by special order, request a quote
£146.00
INC VAT
£121.67 EX VAT
Dimensions:
M8 x 20mm
High tensile M8 socket cap head bolt used to bolt RAM clutch to the crank, this is the only type of bolt that will work in this application
6 bolts required
More than 5 in stock
£0.90
INC VAT
£0.75 EX VAT
O ring to replace standard pushrod seals on 5 speed big twins. Guzziology recommends fitting six of these instead of pushrod bush CLA14900. These can be fitted whils the pushrod is in the gearbox
6 required
More than 5 in stock
14085900-z 14085900 GU14085900 14 08 59 00
1408 5900 1408.5900 14.08.59.00
£0.60
INC VAT
£0.50 EX VAT
Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Supplied with operating lever. Mounting holes at 50mm centres
Brembo ref. 10.2934.02 See BRA19500 for the elbow that the fluid supply pipe fits onto. Also see BRC19001 for a reconditioned PS15 MC
This part is due back in stock soon, call 01484 841395 to reserve yours
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£195.00
INC VAT
£162.50 EX VAT
Dimensions:
15mm OD piston
Profesionally rebuilt Brembo PS 15 rear master cylinder for models with a remote reservoir. Mounting holes at 50mm centres.
Brembo ref. 10.2934.02
Usually supplied as a bare master cylinder with a piston installed. Spring, operating lever and input elbow may not be included. See BRA19500 for the elbow that the fluid supply pipe fits on to and BRA19667 for the return spring. Send us your old rebuildable (i.e. with a undamaged bore) PS15 for a £10 credit against your next order.
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£80.00
INC VAT
£66.67 EX VAT
Brembo PS 15 rear master cylinder for models with a remote reservoir. Supplied with operating lever. Mounting holes at 50mm centres
Also known as Guzzi ref. also known as Guzzi ref. 30666960, 65660200, 10477665, 31666990. Brembo ref. 10.2934.02 Discontinued by Brembo- See BRA19001 for alternative part
Sorry, this part is no longer available.
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
Sorry this item is out of production
Secure online shopping 
