Shop headings: New Spares | Used Spares | Accessories | Brands
1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely
Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.
Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name
More than 5 in stock
GU30530527
£14.00
INC VAT
£11.67 EX VAT
1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely
Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name
More than 5 in stock
£14.00
INC VAT
£11.67 EX VAT
Fork seal for Marzocchi M1R forks
More than 5 in stock
30530502-z 30530502 GU30530502 30 53 05 02
3053 0502 3053.0502 30.53.05.02
Also fits Laverda SFC1000
£10.50
INC VAT
£8.75 EX VAT
Washer / shim, protects head bearing
2 required
This part is available by special order, request a quote
AP8123641
£10.00
INC VAT
£8.33 EX VAT
Swingarm bearing oil seal
Dust seal for swingarm bearing
More than 5 in stock
90403040 GU90403040 90 40 30 40
9040 3040 9040.3040 90.40.30.40
£7.50
INC VAT
£6.25 EX VAT
Needle roller bearing used in lower suspension linkage for rear shock absorber. 7 bearings required per bike
See SUA81068 for bearing oil seal
2 in stock
AP8110066
£6.60
INC VAT
£5.50 EX VAT
Dust cover for steering head bearing
2 required on Cali EV and other models
This part is due back in stock soon, call 01484 841395 to reserve yours
14517000 GU14517000 14 51 70 00
1451 7000 1451.7000 14.51.70.00
£6.50
INC VAT
£5.42 EX VAT
Oil seal for bearing used in lower suspension linkage for rear shock absorber. 8 seals required per bike
More than 5 in stock
AP8110068
£4.00
INC VAT
£3.33 EX VAT
Large washer used under stem nut
2 in stock
30516500 GU30516500 30 51 65 00
3051 6500 3051.6500 30.51.65.00
£3.00
INC VAT
£2.50 EX VAT
Washer for crankshaft timing sprocket
Also used on steering stem on some models (e.g. T3)
1 in stock
95100837 GU95100837 95 10 08 37
9510 0837 9510.0837 95.10.08.37
£1.80
INC VAT
£1.50 EX VAT