Complete right hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb

Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection. Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112644 and 28112600.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip

 This part is available by special order, request a quote

 28112610 GU28112610 28 11 26 10
 2811 2610 2811.2610 28.11.26.10

Complete left hand PHF 30 carb, supplied ready to fit with cable adjuster. Suitable as a replacement for the discontinued square slide VHB30 carb

Jetted to suit your model.
M48 x 1.25 Threaded air intake connection.
44mm Rubber sleeve type engine connection. Cable type choke mechanism fitted, lever choke can be fitted if requested when ordering. Also known as Guzzi ref. 28112645.
Use FUA30611 manifold kit. For cables use CAA17562 with standard plastic twinpull twistgrip or CAA20000 with Tommaselli 2C twistgrip

 This part is available by special order, request a quote

 28112611 GU28112611 28 11 26 11
 2811 2611 2811.2611 28.11.26.11

Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHF 30 carb conversions on models previously fitted with VHB30 carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts. Can be used to replace PHF30 inlet manifolds 17116265 and 17116365 which are no longer available. These manifolds exit the heads at a different angle to VHB manifolds and in some cases you may need to modify side panels to allow clearance for air filters

 1 in stock

Special Inlet rubber with HT lead guide for late Dellorto PHM carbs with a inlet stub OD of 46mm

Use clip SSA45970
This part will only fit late PHM40 carbs with 46mm inlet stubs, we recommend measuring your carbs before ordering

 2 in stock

Airbox back, fits between breather box and rear of carbs

 Sorry, this part is no longer available.

 17114350 GU17114350 17 11 43 50
 1711 4350 1711.4350 17.11.43.50

Dellorto needle valve and seat for PHF 30 carbs

 2 in stock

Dellorto V9 slide needle for VHB 30 carbs

Standard needle clip position is 2nd groove from top

 This part is due back in stock soon, call 01484 841395 to reserve yours

 13937700 GU13937700 13 93 77 00
 1393 7700 1393.7700 13.93.77.00

Pod type air filter for increased air flow

Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits VHB 29, VHB 30, PHBH28 and PHBH30 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

 This part is available by special order, request a quote

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14933000 GU14933000 14 93 30 00
 1493 3000 1493.3000 14.93.30.00

Dellorto Float Chamber Nut for PHF and PHM Carbs

 This part is available by special order, request a quote

 14931850 GU14931850 14 93 18 50
 1493 1850 1493.1850 14.93.18.50