Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

 3 in stock

Stainless steel drain plug for drive box and gearbox, includes recess for crush washer to locate in. Also used as level plug on big twins and front sump drain on small twins.

Also known as Guzzi ref. 95980212, 95980610. Use crush washer SIA10900 with this bolt

 More than 5 in stock

95980214-z 95980214 GU95980214 95 98 02 14
 9598 0214 9598.0214 95.98.02.14

Heavy duty stainless steel exhaust silencer clamp replaces Guzzi ref. 29123450, 03123400

 More than 5 in stock

 14123400 GU14123400 14 12 34 00
 1412 3400 1412.3400 14.12.34.00

Stainless steel after market exhaust stud

M6 exhaust stud. See ENA31881 for stud nut. Note that unlike the originals these studs are threaded along their entire length.

 More than 5 in stock

 96506042 GU96506042 96 50 60 42
 9650 6042 9650.6042 96.50.60.42

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

 More than 5 in stock

 96508040 GU96508040 96 50 80 40
 9650 8040 9650.8040 96.50.80.40

Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

 More than 5 in stock

1A003632R

Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.

See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636

 More than 5 in stock

1A003632R

Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro

Front (shorter) M12 socket cap stainless steel bolt for fixing footrest hanger to lower frame rail and upper frame

Also known as Guzzi ref. 98663630 and 98613630. Six of these used to secure lower frame rail on Le Mans 1 and 2, one used on T3

 4 in stock

98623630-z 98623630 GU98623630 98 62 36 30
 9862 3630 9862.3630 98.62.36.30

Rear (longer) M12 socket cap stainless steel bolt for fixing footrest hanger to lower frame rail and upper frame

3 of these used on T3 lower frame rails

 More than 5 in stock

98623635-z 98623635 GU98623635 98 62 36 35
 9862 3635 9862.3635 98.62.36.35

Polished stainless steel left hand lower frame rail cover supplied with fixings

 Sorry, this part is no longer available.

29447450-z 29447450 GU29447450 29 44 74 50
 2944 7450 2944.7450 29.44.74.50