Shop headings: New Spares | Used Spares | Accessories | Brands
Dimensions:
45-70mm ID x 8mm
Stainless steel hose clamp, various applications including securing inlet rubbers
Used to clamp inlet manifold and airbox sleeve (Le Mans 1000)
More than 5 in stock
93305057 GU93305057 93 30 50 57
9330 5057 9330.5057 93.30.50.57
£3.90
INC VAT
£3.25 EX VAT
Dimensions:
32-57mm ID x 8mm
Stainless steel hose clamp, various applications
Used to clamp inlet manifold (FUA19114) on Nevada (pre 2004), V65, V65 Florida, Lario, Monza and V50 3
More than 5 in stock
93305032 GU93305032 93 30 50 32
9330 5032 9330.5032 93.30.50.32
£3.90
INC VAT
£3.25 EX VAT
Dimensions:
M12 x 30mm
Front (shorter) M12 socket cap stainless steel bolt for fixing footrest hanger to lower frame rail and upper frame
Also known as Guzzi ref. 98663630 and 98613630. Six of these used to secure lower frame rail on Le Mans 1 and 2, one used on T3
4 in stock
98623630-z 98623630 GU98623630 98 62 36 30
9862 3630 9862.3630 98.62.36.30
£4.60
INC VAT
£3.83 EX VAT
Dimensions:
M6 screws
Rocker cover screw kit containing 12 replacement stainless steel socket cap bolts for two valve small twin rocker covers. Only one kit required per engine. Only for twin throttle body V7 models
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted. This kit contains the correct screws for the Breva 750 and 2004 on V7 models but does not include the two flanged M5 screws SSA81523 that fasten the rocker cover covers to the rocker cover (on models other than the V7 Racer)
More than 5 in stock
£5.00
INC VAT
£4.17 EX VAT
Dimensions:
M8 x 48mm x 1.25
Titanium M8 exhaust stud. The factory studs on these models are prone to corrosion so we recommend replacing now with these corrosion free titanium parts.
See Ti stud kit SSA85048 for replacement stud kit. Also known as Guzzi ref. 827018, AP8560061, B017636
More than 5 in stock
1A003632R
Also fits Aprila Caponord, Aprilia 400 Atlantic Sprint, Aprilia 400 Scarabeo Light , Aprilia 500 Atlantic, Aprilia 500 Scarabeo Light , Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 850 SRV, Aprilia 900 Dorsoduro, Aprilia 900 Shiver, Aprilia 900 Shiver ABS, Aprilia 900 SMV Dorsoduro
£5.00
INC VAT
£4.17 EX VAT
Dimensions:
M12 x 35mm
Rear (longer) M12 socket cap stainless steel bolt for fixing footrest hanger to lower frame rail and upper frame
3 of these used on T3 lower frame rails
More than 5 in stock
98623635-z 98623635 GU98623635 98 62 36 35
9862 3635 9862.3635 98.62.36.35
£5.00
INC VAT
£4.17 EX VAT
Dimensions:
M10 x 1.25
Stainless M10 x 1.25 steel banjo bolt, coarser thread (1.25) than most brake fittings. See BRA01001 for M10 x 1 banjo bolt for most other brake fittings and models
2 in stock
£5.00
INC VAT
£4.17 EX VAT
Dimensions:
M12 x 50mm
Socket cap stainless steel bolt M12 extra fine thread for crash bar
Lower crashbar bolt
2 in stock
98621650-z 98621650 GU98621650 98 62 16 50
9862 1650 9862.1650 98.62.16.50
£5.40
INC VAT
£4.50 EX VAT
Dimensions:
M6 x 13mm
Titanium shouldered retaining screw for rocker cover. 4 required for each big twin cylinder head, 3 per head on small twins. Upgrade your corrosion prone zinc OE parts with a polished upgrade.
Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer on CARC models and ENA06716 for sealing washer on other models
More than 5 in stock
842291 MG842291
£5.50
INC VAT
£4.58 EX VAT
Dimensions:
M12 x 80mm
M12 A2 fine thread stainless steel lower crashbar mount bolt for models requiring longer crash bar bolts
5 in stock
£6.00
INC VAT
£5.00 EX VAT
Secure online shopping 
