Washer, sits under fork seal

Also known as Guzzi ref. 03530527

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

The suspension on the V9 models is notoriously cheap, these shocks are an excellent suspension upgrade which will transform your V9. Fully adjustable damping and preload allows you to get your bike handling as it should.

Combine a pair of Hagon Nitro R rear shocks to transform the handling of your V9.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Norge. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget non-adjustable fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your Cali. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote

Fork Top Nut O Ring

 More than 5 in stock

90706238-z 90706238 GU90706238 90 70 62 38
 9070 6238 9070.6238 90.70.62.38

Aluminium fork top nut (bolt), supplied without O ring. Hex socket at both ends

Supercedes Guzzi ref. 14504502 used on some V7 Sports. See SUA90708 for O ring

 This part is due back in stock soon, call 01484 841395 to reserve yours

 14504502 GU14504502 14 50 45 02
 1450 4502 1450.4502 14.50.45.02

Also fits Benelli Sei 900

Aluminium fork top nut (bolt), supplied without O ring. Hex socket at both ends, polished top

See SUA90708 for O ring

 This part is available by special order, request a quote

 61504540 GU61504540 61 50 45 40
 6150 4540 6150.4540 61.50.45.40

Chromed fork stanchion for Marzocchi fork

Use fork seal SUA27584 with this stanchion

 This part is available by special order, request a quote

 32525410 GU32525410 32 52 54 10
 3252 5410 3252.5410 32.52.54.10

Chromed fork stanchion for Kaifa fork

Use fork seal SUA88788 with this stanchion

 This part is available by special order, request a quote

 887887 MG887887