Page 12 of 14
Sort by Title    | Sort by Price |
Fits Moto Guzzi 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV 
Pillion Footpeg Tarozzi
ACA11636 | £37.50 INC VAT£31.25 EX VAT |  | Lightweight folding Tarozzi aluminium pillion footrest on zinc finish steel bracket footpeg. Footpeg is hollow with rubber Sleeve. Supplied with nyloc nut and washer. A great way to tidy up the pillion footrests on your project bike |  | quantityadd to basket
| Dimensions: M10 x 35mm mounting bolt, peg is 110mm x 29mm diameter 2 in stock 01163620 GU01163620 01 16 36 20
0116 3620 0116.3620 01.16.36.20 | | |
|
Fits Moto Guzzi 1000 SP, Convert, G5 | Piston and Barrel Kit 88mm Low Comp Gilardoni Fits 950 Crankcase
ENA18102 | £309.70 INC VAT£258.08 EX VAT |  | Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression Components for one cylinder. See ENA18103 if you need a kit for an 850cc crankcase | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 88mm bore 18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02 | | |
|
Fits Moto Guzzi 1000 SP, G5, Convert | Piston and Barrel Kit High Comp 88mm Fits 950 Crankcase
ENA20054 | £299.00 INC VAT£249.17 EX VAT |  | Complete 950cc big bore piston and barrel kit including gudgeon pin, piston rings and circlips. Piston is Le Man spec (higher compression) and barrel is Nikasil coated Components for one cylinder, this kit is designed for 950cc crankcases which have a larger aperture for the barrel | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 88mm bore, 94mm barrel OD | | |
|
Fits Moto Guzzi T3, T4, G5, Convert, 850T, V7 Sport, S3, Le Mans 1, Le Mans 2
Polished Rocker Cover Set Round Barrel
ENA14235 | £260.00 INC VAT£216.67 EX VAT | 
 | Set of highly polished aluminium round barrel rocker covers (Guzzi ref. 17023550 or 17023560). Ideal for finishing off your restoration project This rocker cover set also known as Guzzi ref. 14023550, these can be fited to square barrel models if fitted with adapter kit ACA30310 | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| 17023560 GU17023560 17 02 35 60
1702 3560 1702.3560 17.02.35.60 | | |
|
Fits Moto Guzzi Le Mans 1, Le Mans 2, T3, Le Mans 3, Mille GT (35mm forks), 1000 SP, Convert, G5, T4, V65, Lario, V7 Sport, V35 Florida, Imola 2, Monza 2
Race Clip On Handlebars Tarozzi
HAA59016 | £99.20 INC VAT£82.67 EX VAT | 
 | Pair of Tarozzi clip ons, with quality aluminium castings and chrome plated tube.
Ideal for your cafe racer or track bike, these clipons give a sporty riding position.
Higher adjustable versions also available. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 35mm stanchions | | |
|
Fits Moto Guzzi 850 GT, V7 Sport, S3, 750S, 850/1000 ALL Models
RAM Clutch Kit Upgrade
CLA20305 | £435.70 INC VAT£363.08 EX VAT |  | Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models. This clutch upgrade has the following advanges over the old two plate clutch:
- Reduction in flywheel and clutch weight of approx. 1KG
- Improved acceleration
- Smoother gear changes at high RPM
- Quicker engine decelleration
- Reduction in engine vibration as the clutch assembly is (this is not possible with the original clutch)
- Lighter handlebar clutch lever action
- More precise clutch engagement and disengagement.
- More progressive clutch engagement.
- Increased ability to handle higher torque and horsepower.
- Lower clutch disk wear (reduced maintenance)
- Fewer parts (no intermediate plate, no second friction plate) to wear out
- Ease of assembly - gearbox can be fitted to engine without centering of the clutch disk.
Kits are complete as shown including: flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. See CLA30399 for replacement clutch plate. See the expoded diagram on our technical documents page for more information about this part.
Please note you will need 6 M8 Schnorr washers ENA14901 which are not included in the kit. See ENA37705 for replacement flywheel bolts | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| | | |
|
Fits Moto Guzzi Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000
Riders Footrest Tarozzi
ACA11610 | £25.20 INC VAT£21.00 EX VAT |  | Replacement Tarozzi footpeg for models with Tarozzi rearsets. Lightweight aluminium with black ribbed rubber. Search for rearsets to see our rearset kits and accessories Well worth carrying as a spare if you have a Tarozzi rearset kit fitted | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 107mm x 28mm overall | | |
|
Fits Moto Guzzi 750S, V7 Sport, S3, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV (1997-2007), Cali Jackal, Cali Stone, Bellagio, Daytona, 1100 Sport Carb
Sump Baffle Plate
ENA14004 | £99.00 INC VAT£82.50 EX VAT |  | Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 1.8mm thickness | | |
|
Fits Moto Guzzi 1100 Sport IE, Centauro, Daytona RS, V11 Sport ALL
Sump Baffle Plate
ENA00004 | £105.00 INC VAT£87.50 EX VAT |  | Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part also known as a windage plate | | This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395. If you would like to be emailed once this item is available again then email us.
| Dimensions: 1.8mm thickness | | |
|
Page 12 of 14
|
Secure online shopping with SagePay 
