Shop headings: New Spares | Used Spares | Accessories | Brands
Long alloy bellmouth intake / trumpet with domed mesh for Dellorto PHM 40 carb, screws to rear of carb replacing air filter
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
High security ABUS alarmed disc lock.
What’s better than a secure lock? A secure lock with an alarm function.
As soon as you have activated the alarm tone on your lock, your lock is armed. If the lock experiences prolonged vibration, it will emit a 100 dB loud alarm signal. If you ever want to use your lock without the alarm function, a 5mm locking bolt made of specially hardened steel will secure your motorbike.
The ABUS “push down†cylinder is easy to operate and locks the bolt automatically.
In case you ever misplace the key, three keys are included in the scope of delivery. A CR2 battery is also included in the scope of delivery so that nothing stands in the way of immediate use.
Order now and we will post your order within 7 days.
275
£49.00
INC VAT
£40.83 EX VAT
The SW-Motech mirror extender kit contains a pair of black mirror extensions that allow you to move your existing mirrors out and up by up to 4cm.
To ensure that your own shoulders aren't the only thing you see in the rear-view mirror, the extensions provide a significantly improved field of vision by relocating the mirrors to the outside. Once adjusted and screwed on, the sturdy, well-designed extensions provide secure hold for the mirrors, even when riding off-road or at high speeds.
See this link for fitting instructions.
1 in stock
£53.00
INC VAT
£44.17 EX VAT
Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
This part is due back in stock soon, call 01484 841395 to reserve yours
£53.00
INC VAT
£44.17 EX VAT
Pair of chrome tubular rocker cover protector bars for square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet.
This part is available by special order, request a quote
£55.00
INC VAT
£45.83 EX VAT
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Long screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius. Will not fit later 8V models that have unthreaded dipstick
Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick
This part is available by special order, request a quote
05004930 GU05004930 05 00 49 30
0500 4930 0500.4930 05.00.49.30
£60.00
INC VAT
£50.00 EX VAT
Long screw in polished alloy thermometer dipstick with O ring. Shows oil temperature in degrees celcius. Will not fit later 8V models that have unthreaded dipstick
Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick
This part is available by special order, request a quote
05004930 GU05004930 05 00 49 30
0500 4930 0500.4930 05.00.49.30
£60.00
INC VAT
£50.00 EX VAT
Clamp on bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors
Ideal for models like the V7 Racer where bar ends are fitted. This elegant LSL Clubman mirror fits all 22mm and 1" bars. Fits left or right. Blue tinted glass to reduce glare
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is due back in stock soon, call 01484 841395 to reserve yours
£60.00
INC VAT
£50.00 EX VAT
Pair of aluminium spacers and gaskets which allow the fitting of a round barrel rocker cover (loop or T3 type) on a square barrel engine
Rocker cover adapter kit - a simple way to get the classic round barrel appearance without swapping barrels and heads. This kit contains a pair of adapter plates and all neccessary gaskets
3 in stock
£70.00
INC VAT
£58.33 EX VAT