46.5mm inlet valve

 This part is available by special order, request a quote

 37036005 GU37036005 37 03 60 05
 3703 6005 3703.6005 37.03.60.05

39.5mm exhaust valve

 This part is available by special order, request a quote

 37036105 GU37036105 37 03 61 05
 3703 6105 3703.6105 37.03.61.05

Complete gasket kit

This is only a gasket set containing gaskets and crush washers, it does not include oil seals and O rings. Also required for a top end overhaul are 2 x ENA90203 and 12 x ENA97624

 This part is available by special order, request a quote

01999000-z 01999000 GU01999000 01 99 90 00
 0199 9000 0199.9000 01.99.90.00

Cam follower / tappet, standard size

Not for PI / hydraulic tappet models produced between 2003 and 2006

 2 in stock

 17045860 GU17045860 17 04 58 60
 1704 5860 1704.5860 17.04.58.60

Complete gasket kit

This is only a gasket set, it does not include oil seals and O rings. The top end O rings required are 12x ENA97624 and 2 x ENA90203

 1 in stock

30999060-z 30999060 GU30999060 30 99 90 60
 3099 9060 3099.9060 30.99.90.60

Stainless steel braided hose oil lines for heads on square barrel models. See ENA14662 if you also need threaded link to cylinder head

Always replace crush washers (SIA12200 x 2 and SIA10900 x 2) when replacing oil lines, you may also require our banjo bolt ENA95990. Also known as Guzzi ref. 01153600 and 01153602

 3 in stock

 14153660 GU14153660 14 15 36 60
 1415 3660 1415.3660 14.15.36.60

Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads

 This part is due back in stock soon, call 01484 841395 to reserve yours

Uprated double row cam chain, ideally fit with sprung chain tensioner ENA20071

 This part is due back in stock soon, call 01484 841395 to reserve yours

 28058060 GU28058060 28 05 80 60
 2805 8060 2805.8060 28.05.80.60

Pair of chrome tubular rocker cover protector bars for square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped

These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet.

 This part is available by special order, request a quote

Kit containing 4 Litres of Millers ZFS 4T SAE20W-50 synthetic engine oil and 2 litres of Extreme Pressure gearbox and drivebox oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil.

Please note this kit CANNOT be posted outside of the UK mainland area

 5 in stock