Lower Gasket for oil sump flange

See ENA14036 for upper sump flange gasket

 This part is due back in stock soon, call 01484 841395 to reserve yours

01003600-z 01003600 GU01003600 01 00 36 00
 0100 3600 0100.3600 01.00.36.00

Quality sump gasket, used for upper sump gasket on V11 Sport, 1100 Sport and Daytona RS. See ENA01360 for lower sump gasket for V11 Sport, 1100 Sport and Daytona RS. See ENA05630 for lower sump gasket for CARC models up to 2015.

Two required if you have a sump extension fitted. Supercedes Guzzi ref. 01003650

 More than 5 in stock

 14003600 GU14003600 14 00 36 00
 1400 3600 1400.3600 14.00.36.00

Deep sump spacer made from alloy. This increases the volume of air in the crankcase and helps reduce 'heavy breathing'. The oil is also better cooled when using one of these. Finished externally in silver paint

To fit this sump spacer you will need longer sump bolts (14 x SSA06055 + 4 x SSA06090) and a pair of sump gaskets (ENA14036). You will also need a longer dipstick, see ENA28005

 Availability varies on this part, check availability

 14003240 GU14003240 14 00 32 40
 1400 3240 1400.3240 14.00.32.40

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range. Includes a cut out for the oil filter and dipstick

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part is also known as a windage plate. Note that deep sump ENA14005 is not compatible with this plate

 1 in stock

Sump baffle or sloppage plate manufactured in the UK from stainless steel. It prevents oil starvation under heavy acceleration, especially when riding up steep hills and exends the life of the big ends. It will also help prevent 'heavy breathing', excessive oil misting and the resulting loss of oil which often occurs on big Guzzi twins when used in the upper RPM range.

To fit this sump plate you will need a pair of sump gaskets (ENA14036). This part also known as a windage plate

 This part is available by special order, request a quote

Large spring washer

Used behind camshaft nut

 2 in stock

 14433400 GU14433400 14 43 34 00
 1443 3400 1443.3400 14.43.34.00

Spring, used as rocker thust spring valve gear on older big twin models

 1 in stock

 94322215 GU94322215 94 32 22 15
 9432 2215 9432.2215 94.32.22.15

Outer valve spring on big valve two valve Tonti frame models or driveshaft spring for spine frame models

 This part is due back in stock soon, call 01484 841395 to reserve yours

28037460-z 28037460 GU28037460 28 03 74 60
 2803 7460 2803.7460 28.03.74.60

A2 stainless socket cap screw M6 x 90mm, used for long sump mount bolts where a sump extension is fitted

 More than 5 in stock

A2 stainless socket cap screw M6 x 55, used for long sump bolt on 850/1000 models where there isn't a sump extension, but used for shorter sump bolt where a sump extension is fitted

14 required if used with sump extension, 4 if used without sump extension

 More than 5 in stock