Sump bolt kit containing all replacement stainless steel socket cap bolts for your sump cover

For Cali EV models check whether you have a sump extension fitted, the earlier models withh sump extension use SSA80007. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models with billet rocker cover protectors fitted as these models need 8 of the bolts to be longer

Sump bolt kit containing all replacement stainless steel socket cap bolts for models without a sump extension fitted

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

Sump bolt kit containing all replacement stainless steel socket cap bolts for models with a sump extension fitted. Some models e.g. Cali 1100 and series 1 Cali EV models have a sump extension fitted as standard

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). For Cali EV models check whether you have a sump extension fitted, the later one piece deep sump uses SSA80008

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

M6 flat stainless steel washer

Dimensions:
M6 x 12mm x 0.75mm

M5 screw for attaching points cover

2 required per distributor. Can be used in place of hex bolt Guzzi ref. 98082225

Dimensions:
M5 x 25mm

A2 M6 x 35mm stainless steel socket cap screw used for timing cover,and gearbox cover on big twins. Also use for fitting our billet rocker cover protectors (ACA17941 / ACA14940)

Also used in place for Guzzi ref. 98680335 or 884039

 98690335 GU98690335 98 69 03 35
 9869 0335 9869.0335 98.69.03.35

Dimensions:
M6 x 35mm

M4 screw for attaching points to backplate

12 required per distributor

Dimensions:
M4 x 8mm

A2 stainless socket cap screw M6 x 30

Used for alternator cover screws on 850/1000 models and gearbox case to bellhousing on V50, V35. Also known as Guzzi ref. 98682330, 98310630, 98620330

Dimensions:
M6 x 30mm