The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares T5 SP II Spada 3 Mille GT Strada 100 Clutch

Sort by Title

Sort by Price

Page 2 of 4

1 2 3 4

Clutch Cable

CAA135CB Fits Mille GT (1987 - 1993), Cali 3 Classic

Dimensions:
1405mm outer length, 90mm free length, 9.2mm barrel nipple, 9.9mm barrel nipple

Clutch cable for models with Domino switchgear only

We advise you to measure your existing cable before ordering in case you have a non standard set up.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

28093034-z 28093034 GU28093034 28 09 30 34
2809 3034 2809.3034 28.09.30.34

£16.60

INC VAT

£13.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centering Tool

TOA30510 Fits 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Spada 3, V11 Sport ALL, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542), Daytona, Centauro, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl)

Splined tool for aligning clutch plates on reassembly, without this clutch alignment tool you risk damaging the intermediate plate. The tool screws into the back of the crankshaft to compress the clutch springs and align the clutch friction plates

Suitable only for later clutch centre spline type (e.g. clutch plate CLA05430). As used by the Gutsibits spanner monkeys on their bikes

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

30906510 GU30906510 30 90 65 10
3090 6510 3090.6510 30.90.65.10

£110.00

INC VAT

£91.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Deep Spline

CLA30810 Fits Strada 1000, 1000S, Spada 3, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542), Daytona, 1100 Sport ALL, Cali 1100 (1994-1997), Quota ALL, Centauro, 1000S, Cali EV, Cali Stone, Cali Jackal, Cali Vintage

Deep splined clutch hub / gear for later models, requires deep splined clutch plates CLA05430. Can be retro fitted to earlier 850/1000 models

Kit CLA20302 available separately containing all required parts to upgrade early shallow splined clutches to later improved specification

This part is available by special order, request a quote

30081810 GU30081810 30 08 18 10
3008 1810 3008.1810 30.08.18.10

£78.00

INC VAT

£65.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Nut Tool

TOA14651 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Tool for clutch centre gear nut

Half inch socket drive. This is a cheaper aftermarket tool- see TOA14903 for original factory item

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03

£39.00

INC VAT

£32.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Centre Nut Tool

TOA14903 Fits V7 Sport, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Factory tool for clutch centre gear nut, this is a superior design tool intended for repeated use

Designed to fit the original factory spec nut- this may not fit some aftermarket items. See TOA14651 for cheaper aftermarket tool

This part is available by special order, request a quote

14912603 GU14912603 14 91 26 03
1491 2603 1491.2603 14.91.26.03

£70.00

INC VAT

£58.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Freeplay Adjuster

GEA14090 Fits 850/1000 All Models, Cali 1100 (1994-1997), Cali EV, 1100 Sport ALL, Quota 1100, V7 ALL, V7 II ALL

Dimensions:
M8 x 20mm

Clutch adjustment bolt for gearbox rear, adjusts freeplay on clutch arm

Adjuster screw, see GEA92508 for nut

part in stock 1 in stock

14090400 GU14090400 14 09 04 00
1409 0400 1409.0400 14.09.04.00

£15.00

INC VAT

£12.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate New Type

CLA05430 Fits 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, Spada 3, Strada 1000, V11 Sport, Le Mans 1000 (from engine VV016375), Mille GT (from engine VT024596), Cali 3 (from engine VT032542),, Daytona, Centauro, Cali Vintage, Bellagio, Daytona, Centauro, Breva 850, Breva 1100, Griso 850, Griso 1100, Norge (2v/cyl), 1200 Sport (2v/cyl), Jackal

New type clutch friction plate for models with deep splines with deep splined centre

2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)

These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510

part in stock 4 in stock

05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30

£57.70

INC VAT

£48.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate Original Type

CLA28460 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, T3, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, G5, T4, SP II, Cali 2, Le Mans 1000 (to engine VV016375), Mille GT (to engine VT024596), Cali 3 (to engine VT032542)

Dimensions:
Spline depth approx. 3mm

Original type clutch friction plate for big twins

2 plates required per clutch overhaul- thicker side of each plate should face transmission. Also check your intermediate plate 12082300. This has shallower splines than the Spada 3 on plates. These are the best fit if you still have the original shallow spline clutch hub. Also known as Guzzi ref. 12084400

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60

£52.00

INC VAT

£43.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate Original Type Newfren

CLA28461 Fits 750S, S3, V7 Sport, V7 Special (1969-1971), V7 700, 850 GT, T3, Le Mans 1, Le Mans 2, Le Mans 3, 1000 SP, G5, T4, SP II, Cali 2, Le Mans 1000 (to engine VV016375), Mille GT (to engine VT024596), Cali 3 (to engine VT032542)

Shallow splined Newfren clutch friction plate for big twins with old shallow splined clutch centre

This part is available by special order, request a quote

28084460-z 28084460 GU28084460 28 08 44 60
2808 4460 2808.4460 28.08.44.60

£58.00

INC VAT

£48.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Gear Nut

CLA93022 Fits 750S, V7 Sport, S3, 850 GT, 850/1000 ALL Models, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone, Centauro, Daytona, 1100 Sport, Quota 1100, Breva 1100, Breva 1200, Griso 850, Griso 1100, 1200 Sport (2006-2007), Norge ALL

Dimensions:
21mm ID

Nut for clutch centre gear CLA30810, fits on gearbox input shaft

See TOA14903 for special tool

part in stock 3 in stock

93601022-z 93601022 GU93601022 93 60 10 22
9360 1022 9360.1022 93.60.10.22

£10.00

INC VAT

£8.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 4

1 2 3 4