Shop headings: New Spares | Used Spares | Accessories | Brands
The innovative Stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. Suitable for models with two bleed nipples per caliper
Linked Guzzi brake systems are notoriously tricky to bleed, this M6 auto bleed nipple can save you hours of tedious squeezing and pumping! This bleed nipple is slightly longer than the standard part so some thread will be left showing even when fully closed.
More than 5 in stock
£26.50
INC VAT
£22.08 EX VAT
Brembo rebuild kit for Brembo F05 (P5) calipers with 32mm pistons. Contains 2 bolts, all seals and brake grease
This caliper also known as P2 F05N, P32B and P32F.
This seal kit also known as Brembo ref. 120279910, also used on Benelli 504 Sport, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4 (rear).
Not suitable for P32 rear calipers fitted to 750T and Nevada 750 (1991-2001) - see BRA01723 for this model. Will not fit pistons on Grimeca F05 calipers.
More than 5 in stock
39659000 GU39659000 39 65 90 00
3965 9000 3965.9000 39.65.90.00
Also fits Benelli 504 Sport, Benelli 250 TS, Ducati Pantah 500SL, 650 Al'Azzura, Ducati 500s, Laverda 500 Montjuich and Zeta (front) and Bimota DB1 and YB4
£26.00
INC VAT
£21.67 EX VAT
Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease
This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement
5 in stock
10273920 GU10273920 10 27 39 20
1027 3920 1027.3920 10.27.39.20
Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota
£26.00
INC VAT
£21.67 EX VAT
Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder
Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'
1 in stock
£24.50
INC VAT
£20.42 EX VAT
Black brake lever for PS12 and PS15 round master cylinders. Can also be used as clutch lever on some Ducati models that have hydraulic clutches
Includes threaded preload ajuster
This part is due back in stock soon, call 01484 841395 to reserve yours
14605650-z 14605650 GU14605650 14 60 56 50
1460 5650 1460.5650 14.60.56.50
Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda
£24.00
INC VAT
£20.00 EX VAT
Single stainless steel M10 banjo bolt with bleed nipple for Brembo fittings. Supplied with bleed nipple cap and crush washers. Perfect for bleeding up old P9, F08 and F05 calipers where the bleed nipple has broken off. This can also be used to add additional bleed points to linked systems where airlocks are causing problems
These can be used to replace the standard banjo bolt on CARC models. See alternative part BRA41653 for Stahlbus auto bleed banjo bolt
More than 5 in stock
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
Pair of EBC FA047 sintered brake pads for Brembo F05 (P5) and Grimeca calipers for extra braking power
Fits Nevada up until frame no. LK112433 Fits all calipers on pre 1993 models
Order now and we will post your order within 7 days.
27654610-z 27654610 GU27654610 27 65 46 10
2765 4610 2765.4610 27.65.46.10
Also fits Benelli 250 TS
£21.00
INC VAT
£17.50 EX VAT
Brakelight switch banjo bolt
See BRA01004 and BRA01014 for alternative universal stop light switch. Also known as Guzzi ref. 06261020, 000037891, 800037891, 079654114, 14657050
This part is due back in stock soon, call 01484 841395 to reserve yours
14657959 GU14657959 14 65 79 59
1465 7959 1465.7959 14.65.79.59
£21.00
INC VAT
£17.50 EX VAT
Screw in brakelight switch for linked system proportioning valve or splitter
Screws into yoke mounted manifold for hand brake
This part is available by special order, request a quote
25657001 GU25657001 25 65 70 01
2565 7001 2565.7001 25.65.70.01
£19.90
INC VAT
£16.58 EX VAT
Brembo pad pin kit for Brembo F05 (P5) calipers. Contains one long pin, two short and retaining spring
Brembo ref. 120280010, also used on some Laverdas . Front calipers only on Strada
More than 5 in stock
39659100 GU39659100 39 65 91 00
3965 9100 3965.9100 39.65.91.00
Also fits Benelli 250 TS
£19.50
INC VAT
£16.25 EX VAT