The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares V65 Lario 750 Targa Strada 750 750T Brakes

Sort by Title

Sort by Price

Page 6 of 8

1 2 3 4 5 6 7 8

Brakeline Front LH Caliper to Fixed Pipe

BRA17886 Fits V35 II, V35 3, V35C, V50 3, V50C, V65C, V65 Florida, V75 PA, 750 Targa, Strada 750, 750 SP, Cali 3, Le Mans 2, Le Mans 3, Cali 1100

Dimensions:
74cm long

Brake pipe used for supplying front left hand caliper, screws directly into caliper

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

17658860-z 17658860 GU17658860 17 65 88 60
1765 8860 1765.8860 17.65.88.60

£34.00

INC VAT

£28.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Brakeline Front RH Caliper to Front Manifold

BRA63657 Fits V35 II, V35C, V50C, V50 3, V65C

Dimensions:
50cm long

Front right hand brake pipe linking right hand caliper to manifold on front yoke

Original type rubber brakeline with chunky galvanized ends

This part is available by special order, request a quote

63657121-z 63657121 GU63657121 63 65 71 21
6365 7121 6365.7121 63.65.71.21

£30.50

INC VAT

£25.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Pad Pin Kit F05

BRA39910 Fits V35, V50, V65, V75, Strada 750, Targa, 750, Nevada ALL (1993-1998)

Brembo pad pin kit for Brembo F05 (P5) calipers. Contains one long pin, two short and retaining spring

Brembo ref. 120280010, also used on some Laverdas . Front calipers only on Strada

part in stock More than 5 in stock

39659100 GU39659100 39 65 91 00
3965 9100 3965.9100 39.65.91.00

Also fits Benelli 250 TS

£19.50

INC VAT

£16.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Clevis Pin

GEA95265 Fits Convert, G5, Cali 2, Cali 3, Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, Spada ALL, T5, V35 ALL, V50 ALL, V65 ALL

Dimensions:
6mm OD

Clevis pin used in brake and gear change linkages, wears over time so well worth replacing on high mileage bikes

Replaces Guzzi refs. 95780265, 95780267, 95770265-Z, 95780265-Z. See BRA95227 for retaining split pin

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

95770265 GU95770265 95 77 02 65
9577 0265 9577.0265 95.77.02.65

£11.76

INC VAT

£9.80 EX VAT this is the price you will pay if you are ordering from outside the UK

Double Banjo Bolt M10 Stainless Steel Standard Thread

BRA01005 Fits V35 ALL, V50 ALL, V65 ALL, V75

Dimensions:
M10 x 1.25

Stainless steel M10 double banjo bolt for aluminium coloured brake manifolds only, used with front yoke mounted splitter on some small twins

Supplied with 3 crush washers

This part is available by special order, request a quote

95990034 GU95990034 95 99 00 34
9599 0034 9599.0034 95.99.00.34

£7.20

INC VAT

£6.00 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 1L DOT 4

BRA99003 Universal Part

Dimensions:
1 litre

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

part in stock More than 5 in stock

£13.75

INC VAT

£11.46 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 500ml DOT 4

BRA99002 Universal Part

Dimensions:
500ml

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

part in stock More than 5 in stock

£7.92

INC VAT

£6.60 EX VAT this is the price you will pay if you are ordering from outside the UK

Gear or Brake Linkage Block

GEA18551 Fits V35 ALL, V50 ALL, V65 ALL, Nevada 750 ALL, Strada 750, 750 Targa, 750 SP, V7 Stone, V7 Special, V7 Racer, V7 II ALL, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
M6 threads, 8mm ID hole

Threaded linkage block used on brake or gear linkages (varies by model). Screws to M6 threaded rod

Wears over time, so we recommend replacing if your gear or brake linkage is sloppy

This part is available by special order, request a quote

18257551 GU18257551 18 25 75 51
1825 7551 1825.7551 18.25.75.51

£63.00

INC VAT

£52.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Grommet

FRA91167 Fits Cali 1400 ALL, Nevada 350, Nevada 750, Strada 1000, Strada 750, V11 Sport ALL, V75 PA

Dimensions:
8mm ID x 18mm OD x 15mm wide

Black rubber grommet with various applications including screen mounting and master cylinder mount

part in stock 4 in stock

91551167 GU91551167 91 55 11 67
9155 1167 9155.1167 91.55.11.67

£1.30

INC VAT

£1.08 EX VAT this is the price you will pay if you are ordering from outside the UK

M10 Banjo Bolt Stainless Steel Standard Thread

SSA97323 Fits V35 II, V50 3, V65, Cali 2

Dimensions:
M10 x 1.25

Stainless M10 x 1.25 steel banjo bolt, coarser thread (1.25) than most brake fittings. See BRA01001 for M10 x 1 banjo bolt for most other brake fittings and models

part in stock 2 in stock

£5.00

INC VAT

£4.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 6 of 8

1 2 3 4 5 6 7 8