Upper fork bush

Split fork bush, also known as Guzzi ref. 30525861. No longer available.

 Sorry, this part is no longer available.

 599629 MG599629

Dust cover for fork seals

Suitable for V11 models with 40mm Marzocchi forks, also known as Piaggio ref. 599502, 00H00202231, AP8123201, AP8123296, AP8123777
See SUA01535 for 43mm version.

 2 in stock

 01530571 GU01530571 01 53 05 71
 0153 0571 0153.0571 01.53.05.71

Also fits Aprilia RS 125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio X9 500 Evolution (2006-2007)

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.

Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Fork seal for Kaifa fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Kaifa fork. Also known as Guzzi ref. 887884

 2 in stock

 887884 MG887884

Fork seal for Marzocchi fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Marzocchi fork. Also known as Guzzi ref. 599501 and 01530569

 5 in stock

 27530584 GU27530584 27 53 05 84
 2753 0584 2753.0584 27.53.05.84

Also fits Aprilia RS125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio, X9 500 Evolution (2006-2007)

Oil seal for base of steering stem

Dust seal

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8144146

Fork dust seal for Kaifa fork

Two fork types are used on mark 1 V7 models, we recommend checking your old fork seal before opening. These dust seals are for the Kaifa fork

 2 in stock

 887886 MG887886