M6 wavy washer

Also known as Guzzi ref. 95129115

 More than 5 in stock

 03013800 GU03013800 03 01 38 00
 0301 3800 0301.3800 03.01.38.00

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.
The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 This part is available by special order, request a quote

This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.

Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.

See installation instructions here.

 This part is available by special order, request a quote

HIgh performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 This part is available by special order, request a quote

Stainless steel exhaust stud nut (allen nut)

See ENA31881 for less expensive alternative part

 This part is available by special order, request a quote

 31121880 GU31121880 31 12 18 80
 3112 1880 3112.1880 31.12.18.80

Pair of polished reverse cone stainless steel performance silencers with exclusive aluminium end caps from Mistral. The reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in black finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.
Also available in black
Silencer gaskets now included with these silencers

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of black finish reverse cone stainless steel performance silencers with exclusive aluminium end caps from Mistral. The reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.
No remap required

Silencer gaskets now included with these silencers

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of satin finish short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in black finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers
NB polished finish shown in photos
Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of short reverse cone stainless steel performance silencers from Mistral, the polished reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!
See this video to hear this silencer

 This part is available by special order, request a quote

Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.
No remap required

Also available in polished finish

Euro 4 compliant

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand requires stop bracket FRA33380 to prevent the stand touching the underside of the silencer.

Silencer gaskets now included with these silencers

Release the music in your Guzzi!
See this video to hear this silencer

 1 in stock