Aluminium M6 crush washer used for fork oil drain plug and many other applications depending on model

 More than 5 in stock

 95100116 GU95100116 95 10 01 16
 9510 0116 9510.0116 95.10.01.16

Black O ring used on big twin gearbox input shaft and some fork top nuts

 More than 5 in stock

 90706235 GU90706235 90 70 62 35
 9070 6235 9070.6235 90.70.62.35

M6 socket cap screw used for fork wheel spindle clamp

See SSA06040 for replacement stainless steel part

 This part is available by special order, request a quote

 98680340 GU98680340 98 68 03 40
 9868 0340 9868.0340 98.68.03.40

Stainless steel M10 dome head nut, used for fork slider pinch bolt and other applications

 More than 5 in stock

 92602210 GU92602210 92 60 22 10
 9260 2210 9260.2210 92.60.22.10

Fork dust seal for Kaifa fork

Two fork types are used on mark 1 V7 models, we recommend checking your old fork seal before opening. These dust seals are for the Kaifa fork

 2 in stock

 887886 MG887886

Oil seal for base of steering stem

Dust seal

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8144146

Fork seal for Marzocchi fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Marzocchi fork. Also known as Guzzi ref. 599501 and 01530569

 More than 5 in stock

 27530584 GU27530584 27 53 05 84
 2753 0584 2753.0584 27.53.05.84

Also fits Aprilia RS125 (2006-2010), Aprilia, RX-SX 125 (2008-2010), Gilera Nexus 500 E3 (2006-2008), Piaggio, X9 500 Evolution (2006-2007)

Fork seal for Kaifa fork

Two fork types are used on recent small twins, we recommend checking your old fork seal before opening. These seals are for the Kaifa fork. Also known as Guzzi ref. 887884

 2 in stock

 887884 MG887884

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527