Chrome twin pull Tommaselli 2c twist grip. Includes a pair of handlebar grips, for bikes with dual throttle cables from the bars

As originally fitted to pre 1979 T3's. Not suitable for carbs larger than 36mm (the twistgrip inner will require minor modification to operate PHM40s). This twistgrip can be used on almost any model with suitable custom cables. See ACA14450 for spare rubber. Holes for throttle cable elbow may be smaller than the original and need carefully enlarging with a drill or round file.

 1 in stock

 14603450 GU14603450 14 60 34 50
 1460 3450 1460.3450 14.60.34.50

Stainless steel fasteners kit for VHB carb models without sump extension.This kit contains nuts, bolts and washers for the following: rocker covers, timing cover, gearbox bell housing, alternator cover, gearbox rear cover, neutral switch, drive box to swingarm, starter motor, head studs, exhaust flanges, inlet manifolds and sump. Just what you need to brighten up your Guzzi and ensure nuts and bolts don't seize on your bike

This engine bolt kit contains appropriate M6, M8, M10 socket cap and hex head bolts, nuts and washers. 145 pieces. To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). You may also require a replacement front engine bolt kit in stainless (SSA14450) or distributor screws (SSA05025 and SSA04008)

 More than 5 in stock

Universal rack for mounting H & B top cases to luggage racks which don't have the H & B fitting. Includes grab rail, finished in black.

Because this is a universal rack you may need to do some additional drilling and obtain extra fasteners depending upon which type of luggage rack you are fitting this to

 This part is available by special order, request a quote

Polished aluminium alternator cover

For big twins with Bosch charging systems only. Not deep enough for later bikes with Ducati or Saprisa. See ACA18650 for deeper version.

 This part is available by special order, request a quote

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of polished billet aluminium head protectors, these protect the top end of your engine in the unfortunate event of the bike being dropped.

For round barrel 850 and 1000 models. You may need longer rocker cover bolts due to the thickness of these protectors, see SSA06035 (you'll need 8). Don't confuse these thick, high quality billet items with cheaper imitations, these protectors are exclusive to Gutsibits

 This part is due back in stock soon, call 01484 841395 to reserve yours

Short screw in polished alloy thermometer dipstick with O ring for models without a sump extension. Shows oil temperature in degrees celcius

Supplied unmarked, you will need to mark the rod using a small file to match your existing dipstick

 This part is available by special order, request a quote

17004951-z 17004951 GU17004951 17 00 49 51
 1700 4951 1700.4951 17.00.49.51

Clamp on bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors

Ideal for models like the V7 Racer where bar ends are fitted. This elegant LSL Clubman mirror fits all 22mm and 1" bars. Fits left or right. Blue tinted glass to reduce glare

Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted

Perfect for that classic cafe racer look

 This part is due back in stock soon, call 01484 841395 to reserve yours

Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.

Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).

 This part is due back in stock soon, call 01484 841395 to reserve yours

Polished aluminium distributor cover for models with points or electronic ignition. Alternative for plastic cover ENA14420

See SSA05025 for the screws which secure this dizzie cap

 1 in stock

14715420-z 14715420 GU14715420 14 71 54 20
 1471 5420 1471.5420 14.71.54.20