The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Breva 1100 1200 Sport Norge Griso St Stainless Steel and Titanium Items

Sort by Title

Sort by Price

Page 1 of 8

1 2 3 4 5 6 7 8

Titanium Rocker Cover Screw Kit

SSA89292 Fits Griso 1200, Stelvio, Norge (4v/Cyl), 1200 Sport (4v/Cyl)

Dimensions:
M6 x 13mm

Kit containing 8 titanium shouldered retaining screw for rocker cover. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

Rocker cover bolt. We recommend that you check length of bolts on your engine before ordering as two lengths of bolt were used. Supercedes Guzzi ref. 976591
See ENA83249 for rubber sealing washer

part in stock More than 5 in stock

842291 MG842291

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Single Banjo Fine Thread Stainless Steel

BRA01004 Universal Part

Dimensions:
M10 single banjo fine thread

Universal hydraulic brake light switch. This hydraulic switch replaces discontinued brakelight switches by bolting in place of a single banjo bolt on the handlebar or rear brake master cylinder

NB stop light switch may be supplied with or without 2 pin block connector. Can be used in place of Guzzi ref. 32657060

part in stock 1 in stock

£29.50

INC VAT

£24.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Universal Brake Light Switch Double Banjo Fine Thread Stainless Steel

BRA01003 Universal Part

Dimensions:
M10 double banjo fine thread

Universal hydraulic brakelight switch. This hydraulic switch replaces discontinued brake light switches by bolting in place of a double banjo bolt on the handlebar or rear brake master cylinder

Especially suitable for replacing the standard switch on models where the front brakes have been 'de-linked'

part in stock 1 in stock

£24.50

INC VAT

£20.42 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud Kit Titanium

SSA85048 Fits V7 III ALL, V7 850 ALL, V9 ALL, V85TT, Cali 1400, Audace, 1200 Sport (4v/Cyl), Griso 1200 (4v/Cyl), Norge 1200 (4v/Cyl), Stelvio

Dimensions:
M8 x 48mm studs

Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers

The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come

part in stock More than 5 in stock

1A003632R

£22.00

INC VAT

£18.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Exhaust Stud Kit Stainless Steel

SSA96040 Fits S3, 850/1000 ALL Models, 1100 Sport, V11 Sport, V7 Sport, S3, Cali 1100 (1994-1997), Cali EV ALL, Bellagio, Breva 850, Breva 1100, Breva 1200, 1200 Sport (2v/cyl), Griso 850, Griso 1100, Norge 850, Norge 1200 (2v/cyl)

Dimensions:
M8 x 40mm studs

Stainless steel exhaust stud kit consisting of 4 x studs, 4 x dome head nuts, 4 x wavy washers and 4 x flat washers

On pre-1998 models we recommend combining with a pair of new exhaust polished aluminium flanges - EXA30032

part in stock More than 5 in stock

96508040 GU96508040 96 50 80 40
9650 8040 9650.8040 96.50.80.40

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Bevel Box Filler, Level or Cylinder Head Plug

SSA12600 Universal Part

Dimensions:
M20 x 1.5

M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins), also used for cylinder head bolt

See ACA12600 for aluminium alternative that can be undone by hand. Includes recess for O ring ENA90203

part in stock More than 5 in stock

12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00

£17.50

INC VAT

£14.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Rocker Cover Stainless Bolt Kit

SSA80017 Fits Griso 1100, 1200 Sport (2v/cyl)

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070).
See SSA81522 for rocker cover trim retaining screws, these are not included with this kit.

part in stock More than 5 in stock

£13.00

INC VAT

£10.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Sump Cover Stainless Bolt Kit

SSA80016 Fits Breva 1100, Breva 1200, 1200 Sport, Norge ALL, Griso ALL, Stelvio

Sump bolt kit containing all replacement stainless steel socket cap bolts

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

part in stock More than 5 in stock

£9.00

INC VAT

£7.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Rocker Cover Stainless Bolt Kit Models Without Rocker Cover Protectors

SSA80005 Fits 850/1000 ALL Models, Cali 1100, V11 Sport, 1100 Sport ALL, Cali EV (1997-2009), Quota 1100, Bellagio, Breva 850, Breva 1100, Norge 850, Norge 1200 (2v/Cyl)

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.

See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.

part in stock More than 5 in stock

£9.00

INC VAT

£7.50 EX VAT this is the price you will pay if you are ordering from outside the UK