Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains gaskets, rings, shells, breather pipes and other engine parts
Kit containing 4 Litres of ENI i-Ride Racing SAE10W-60 synthetic engine oil and 1 litre of Extreme Pressure gearbox and drivebox oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil.
Please note this kit CANNOT be posted outside of the UK mainland area
This part is due back in stock soon, call 01484 841395 to reserve yours
£73.00
INC VAT
£60.83 EX VAT
Dimensions:
M8 x 48mm studs
Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers
The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come
More than 5 in stock
1A003632R
£22.00
INC VAT
£18.33 EX VAT
M8 schnorr washer, many applications
6 required for flywheel. Also known as Guzzi ref. 14615901
More than 5 in stock
14615901 GU14615901 14 61 59 01
1461 5901 1461.5901 14.61.59.01
£0.70
INC VAT
£0.58 EX VAT
Dimensions:
10mm ID x 20mm OD
Wavy washer, used for head studs
10 required per engine
More than 5 in stock
14018400-z 14018400 GU14018400 14 01 84 00
1401 8400 1401.8400 14.01.84.00
£1.20
INC VAT
£1.00 EX VAT
Dimensions:
M6 x 35mm
A2 M6 x 35mm stainless steel socket cap screw used for timing cover,and gearbox cover on big twins. Also use for fitting our billet rocker cover protectors (ACA17941 / ACA14940)
Also used in place for Guzzi ref. 98680335 or 884039
More than 5 in stock
98690335 GU98690335 98 69 03 35
9869 0335 9869.0335 98.69.03.35
£1.20
INC VAT
£1.00 EX VAT
Dimensions:
M6 x 25mm
A2 stainless socket cap screw M6 x 25
Used for rocker cover, timing cover, sump (no extension), VHB30 inlet manifold on 850/1000 models and rocker cover, timing cover, sump, inlet manifolds on V50, V35. Also used for rocker cover and sump on all two valve per cylinder Brevas, Grisos etc... (16 required per engine). Also known as Guzzi refs. 98692325 and 98620325 can be used in place of 98822325
More than 5 in stock
05025930-z 05025930 GU05025930 05 02 59 30
0502 5930 0502.5930 05.02.59.30
£1.20
INC VAT
£1.00 EX VAT
Dimensions:
13mm outer diameter x 9mm internal diameter x 2mm
Black cylinder stud O ring
12 needed per big twin engine. 4 fitted per cylinder under rocker gear, 2 under barrel to seal top end oil ways. Can also be used as O rings on big twin distributor shaft. Also known as Guzzi ref. 90706090.
More than 5 in stock
90706094 GU90706094 90 70 60 94
9070 6094 9070.6094 90.70.60.94
£0.55
INC VAT
£0.46 EX VAT
Dimensions:
8.3mm inner diameter x 1mm
M8 crush washer used for cylinder head oil lines and other applications, supplied in aluminium or copper
Can be used in place of copper crush washer 856046
More than 5 in stock
12154200 GU12154200 12 15 42 00
1215 4200 1215.4200 12.15.42.00
£0.60
INC VAT
£0.50 EX VAT
Dimensions:
14mm outer diameter x 10.4mm inner diameter x 1mm
M10 crush washer used for sump (small twins, V11 Sport), gearbox and drive box level and drain plugs. Also used for lower fork damper retaining bolt washer. Used for sump drain on Breva 1100, 1200, Griso etc...
Also known as Guzzi ref. 25656100, 01528930, AP9150472, 95100309, 887879, 25656102, 486075, AP8163091
These may be supplied as either aluminium or copper crush washers
More than 5 in stock
10528900 GU10528900 10 52 89 00
1052 8900 1052.8900 10.52.89.00
£0.50
INC VAT
£0.42 EX VAT
Dimensions:
M6 x 12mm
High tensile flywheel bolt
8 bolts arrived
More than 5 in stock
37067705 GU37067705 37 06 77 05
3706 7705 3706.7705 37.06.77.05
£0.60
INC VAT
£0.50 EX VAT
Secure online shopping 
