1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely

Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

GU30530527

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

1 litre of Agip SAE 5W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

. ENI oils were previously sold under the AGIP nameAs recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 5W and 10W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.

 More than 5 in stock

1 litre of Agip SAE 7.5W fork oil. Eni Fork Oil 7.5W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required.

Eni Fork Oil 5W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.

This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.

The corrosion-resistant properties of Eni Fork Oil 5W allow effective protection of surfaces against corrosive phenomena.

Eni Fork Oil 5W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Steering head bearing, see SUA81079 for upgraded bearing kit

2 required per bike

 Order now and we will post your order within 7 days.

AP8110077

Pair of taper roller steering head bearings with separate seals, this is an upgrade to the standard ball bearing races which is less expensive than the OE parts

1 kit required per bike

 This part is due back in stock soon, call 01484 841395 to reserve yours

AP8110077

Kit containing a pair of progressive shorter fork springs and suitable fork oil by Hyperpro. Springs lower front end by 25mm

Progressive fork springs improve comfort and braking whilst the reduction in seat height improves rider confidence. Simple to fit, these are an ideal upgrade for shorter riders

 This part is available by special order, request a quote

Contains fork seals, dust seals, washers, bushes and retaining clips

One kit required per pair of forks

 This part is available by special order, request a quote

2B006105

Complete replacement Matris damper and spring assembly. Complete replacement fork cartridge kit, replaces all original fork internals

• 20mm AL7075 cartridge with anti friction lapping
• 12mm AL7075 pumping rod with anti friction lapping
• Aluminium billet compression and rebound valves with oilless slide bearings and dedicated shim stacks
• Preload adjuster with 15 specific adjustment clicks
• Compression adjuster with 38 specific clicks
• Rebound Adjuster with 38 specific clicks
• Linear springs available in different rates to tailor set up
• Anti cavitation valve sets
• No modification required to fork leg
• Supplied with high quality fork oil

  Adjustments:

  • Spring preload unit, with specific reference marks
  • Rebound unit with specific clicks
  • Compression unit with specific clicks

   This part is available by special order, request a quote

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Hyperpro lower spring for rear shock. The black spring lowers the rear end of bike by 25mm to help you feel more comfortable on the bike. The front forks can also be dropped through the yokes to make the fitment of this spring a handling neutral change.

For the complete package see SUA85004 for a lowering kit for the forks

 This part is available by special order, request a quote