M6 wavy washer

Also known as Guzzi ref. 95129115

 More than 5 in stock

 03013800 GU03013800 03 01 38 00
 0301 3800 0301.3800 03.01.38.00

Mesh silencer gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

2 exhaust bushes required per bike

 2 in stock

2B007137

This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.

Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.

See installation instructions here.

 This part is available by special order, request a quote

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434.

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock

Pair of short satin finish reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34374 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of short polished finish reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34374 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of short ice grey finish reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34374 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of short black reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of long polished finish reverse cone stainless steel performance silencers with special end caps from Mistral, the reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

4kg lighter that stock silencers
Increased power

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
Includes mounting brackets
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34384 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 This part is available by special order, request a quote

Pair of long full Black Edition reverse cone stainless steel performance silencers with blacked out special end caps from Mistral, the exclusive black finish reverse cone design compliments the classic styling of the V7 models whilst the special end caps are an nice exclusive finishing touch. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

4kg lighter that stock silencers
Increased power

The ultimate V7 850 silencers
Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
4kg lighter than stock
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. You will also need centre stand stop bracket FRA34383 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 This part is available by special order, request a quote