Hepco 'Easy' luggage rack for V100. Designed for Hepco top boxes it features a pillion grab handle which folds flat when not in use (or when a top box is fitted). The rack is easy to fit and transforms your V100 into a capable touring bike.

No additional adapters needed for standard Hepco top boxes with metal locks. If fitting pannier frames you will need to fit either this rack or LUA02097

 This part is available by special order, request a quote

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

• Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
• 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
• Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
• Polished aluminium instrument backs (attach with existing nuts)

Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres

Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit

 1 in stock

Genuine Guzzi centrestand, invaluable for maintenance and safe parking

 This part is available by special order, request a quote

2S001998

Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.

• 550D Polyester construction with PVC coating
• 2mm thick synthetic leather (PU) detailing
• 190D Nylon inner lining material
• 14 litre capacity for each bag
• Product complies with Reach regulations
• Roll-top closure system
• Saddlebag straps with hook and loop fastening closure
• Front handle
• Waterproof removable inner lining with thermo-sealed seams
• Strap with ring loop to fasten to double D-ring
• Front waterproof zip
• KAPPA RAMBLER logo printed on patch
• Bags come with a TNT bag with the KAPPA RAMBLER logo for storage

 Order now and we will post your order within 7 days.

Pair of factory engine crash bars finished in black essential for protecting the exposed header pipes and cylinders from expensive damage

You can mount the factory LED spotlight kit ACA02059 to these bars

Fitting kit ACA01999 also required.

 1 in stock

2S002028

Passenger saddle featuring 3D net inserts for optimal ergonomics and long travel comfort.

 This part is available by special order, request a quote

2S002031

The SW-Motech EVO footpeg kit offers 36 options for the rider footrest position. The kit contains rotating elements with firmly interlocking teeth which allow you to move the standard position by up to 15mm. The position of the footrest can be adjusted so that it's lower or moved forwards or backwards as well as adjusted in terms of its angle to suit your individual needs. It mounts to the original parts of the footrest holder.

See this link for fitting instructions. Silver painted finish

 This part is available by special order, request a quote

The SW-Motech EVO footpeg kit offers 2 options for the rider footrest position; standard or 15mm lower. This reasonably priced ION footrest kit allows the footrests to be mounted at its original height or lowered by 15 mm. Extremely durable and built to last, these stainless-steel footrests provide plenty of extra grip and are recommended for adventure, offroad and urban motorcycles. Hinges made from high-strength aluminum alloy ensure that the footrest can fold out of the way if the bike tips over. The removable rubber top surface reduces vibration, and the profile gives you a firm grip during offroad riding. To mount the bike-specific hinge adapter to the footrest sockets, the original attachments (springs, bolts, etc.) are used.

See https://mi.sw-motech.com/4052572039182/en for fitting instructions. Silver painted finish

 This part is available by special order, request a quote

Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.

The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.

Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted

Perfect for that classic cafe racer look

 This part is available by special order, request a quote

Pair of sturdy black handguards manufactured in the UK. These should save your levers from expensive damage in the unfortunate event of your bike falling over or being dropped and offer superior weather protection for year round riding. Ideal for UK conditions

Compatible with the original factory handlebars. Easily installed. This is a complete kit including brackets and fasteners.

 Order now and we will post your order within 7 days.