Shop headings: New Spares | Used Spares | Accessories | Brands
Stainless steel fine thread M12 half nut, many uses e.g. front engine mounting bolt and gear/brake lever pivot on big twins
M12 nut
More than 5 in stock
92602512-z 92602512 GU92602512 92 60 25 12
9260 2512 9260.2512 92.60.25.12
£2.00
INC VAT
£1.67 EX VAT
Stainless steel front UJ gaiter / boot clip
Also known as Guzzi ref. 12548401. This clip is also suitable for some S & B air filters and inlet manifolds - check outside diameter of carb or throttle body
More than 5 in stock
93305060 GU93305060 93 30 50 60
9330 5060 9330.5060 93.30.50.60
£3.20
INC VAT
£2.67 EX VAT
Large rear UJ joint gaiter clip
More than 5 in stock
12548201 GU12548201 12 54 82 01
1254 8201 1254.8201 12.54.82.01
£3.90
INC VAT
£3.25 EX VAT
Rear (longer) M12 socket cap stainless steel bolt for fixing footrest hanger to lower frame rail and upper frame
3 of these used on T3 lower frame rails
More than 5 in stock
98623635-z 98623635 GU98623635 98 62 36 35
9862 3635 9862.3635 98.62.36.35
£5.00
INC VAT
£4.17 EX VAT
Socket cap stainless steel bolt M12 extra fine thread for crash bar
Lower crashbar bolt
2 in stock
98621650-z 98621650 GU98621650 98 62 16 50
9862 1650 9862.1650 98.62.16.50
£5.40
INC VAT
£4.50 EX VAT
Handy 70g tube of copper grease anti-seize paste
Use to prevent threaded studs, nuts and bolts form seizing
Please note this part CANNOT be posted outside of the UK mainland area
This part is due back in stock soon, call 01484 841395 to reserve yours
£6.00
INC VAT
£5.00 EX VAT
A4 marine grade stainless steel M8 bleed screw for Brembo P4 front caliper and Tokico calipers used on post 1997 models
Part of Guzzi ref. 31659281, 31659260, 17659260 and 05659230
4 in stock
01659230 GU01659230 01 65 92 30
0165 9230 0165.9230 01.65.92.30
£6.10
INC VAT
£5.08 EX VAT
Brilliant chrome, aluminium and metal polish.
Make your Guzzi gleam.
1 in stock
£6.50
INC VAT
£5.42 EX VAT
Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats
Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.
Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap
More than 5 in stock
£7.80
INC VAT
£6.50 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT