The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Cali EV Cali Jackal Cali Stone Specia Exhausts

This section contains silencers, downpipes, H pipes, exhaust flanges and exhaust clamps

Sort by Title

Sort by Price

Page 1 of 4

1 2 3 4

Wavy M6 Washer

ENA03380 Universal Part

Dimensions:
M6 x 12mm

M6 wavy washer

Also known as Guzzi ref. 95129115

part in stock More than 5 in stock

03013800 GU03013800 03 01 38 00
0301 3800 0301.3800 03.01.38.00

£0.90

INC VAT

£0.75 EX VAT this is the price you will pay if you are ordering from outside the UK

V-Twin Boost Plug-In Fuelling Fixer

FUA01001 Fits V7 Classic, V7 Cafe Classic (2007-2012), V7 Racer (2009-2011), Cali EV (2002-2009), Cali Vintage, Cali Classic, Cali Stone (2003-2005), Cali Aquila Nera, Centauro, Daytona, V11 Sport (2003-2006), Quota 1100, Bellagio, 1200 Sport ALL, Breva 1100, Breva 1200, Norge ALL, Griso ALL, Stelvio ALL

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.
The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

Quick and easy installation
Resistant to atmospheric agents and vibrations
Optimized by Mistral for your bike
Best response to the opening of the throttle
Better torque at low-medium range
Reduction of the on/off effect
Correct air/fuel ratio in all conditions with real-time modification

This part is available by special order, request a quote

£100.00

INC VAT

£83.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Rubber Exhaust Mount

EXA05423 Fits 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge ALL

Dimensions:
40mm x 30mm x 20mm overall

Rubber exhaust mount for crossover

2 required per bike, see EXG05124 for special bolt

part in stock 1 in stock

05124230 GU05124230 05 12 42 30
0512 4230 0512.4230 05.12.42.30

£8.59

INC VAT

£7.16 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Silencers Polished Slash Cut Stacked Pair

EXA03030 Fits Bellagio

Pair of stacked polished slash cut Mistral performance silencers with removable baffles, these are a high quality, lightweight, durable and better sounding alternative to the original silencers

Handmade to order in Italy
Laser etched logo
Similar position to the original silencers - retains luggage compatibility
No remap required. Supplied with graphite silencer bushes
Release the music in your Guzzi!

This part is available by special order, request a quote

£615.00

INC VAT

£512.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Silencers Polished Reverse Cone Stacked Pair

EXA03031 Fits Bellagio

Pair of stacked polished reverse cone Mistral performance silencers with removable baffles, these are a high quality, lightweight, durable and better sounding alternative to the original silencers

Handmade to order in Italy
Laser etched logo
Similar position to the original silencers - retains luggage compatibility
Supplied with graphite silencer bushes
No remap required
Release the music in your Guzzi!

This part is available by special order, request a quote

£615.00

INC VAT

£512.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Silencers Polished Reverse Cone 2-1 Kit

EXA03032 Fits Bellagio

2-1 kit for your Bellagio containing a polished crossover and polished reverse cone Mistral performance silencer with removable baffles. This is a high quality, lightweight, durable and better sounding alternative to the original silencers

Handmade to order in Italy
Laser etched logo
Also available in black and satin finishes - enquire for details
Supplied with graphite silencer bushes
No remap required
Release the music in your Guzzi!

This part is available by special order, request a quote

£755.00

INC VAT

£629.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Silencers Black Slash Cut Stacked Pair

EXA03130 Fits Bellagio

Pair of stacked black slash cut Mistral performance silencers with removable baffles, these are a high quality, lightweight, durable and better sounding alternative to the original silencers

This part is available by special order, request a quote

£660.00

INC VAT

£550.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Silencers Black Reverse Cone Stacked Pair

EXA03131 Fits Bellagio

Pair of stacked black reverse cone Mistral performance silencers with removable baffles, these are a high quality, lightweight, durable and better sounding alternative to the original silencers

This part is available by special order, request a quote

£660.00

INC VAT

£550.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Exhaust H Piece Without Lambda Hole Satin Stainless Steel

EXA03901 Fits Cali 1100 (1994-1997), Cali EV (1997-2002), Cali Jackal, Cali Stone, T5, Spada NT, SP II, Spada NT, Cali 2, Cali 3, Mille GT, Strada 1000, Spada 3

Dimensions:
42mm OD for silencer, 38mm ID at downpipe end

Satin finish stainless steel H pipe / collector / balance pipe for models without Lambda probe. Replaces heavy catalytic converter fitted to some models and improves access for oil changes

NB this crossover does not include exhaust clamps. Made to order in Italy by performance experts Mistral

part in stock 1 in stock

03123900 GU03123900 03 12 39 00
0312 3900 0312.3900 03.12.39.00

£105.00

INC VAT

£87.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Exhaust H Piece Without Lambda Hole Polished Stainless Steel

EXA03900 Fits Cali 1100 (1994-1997), Cali EV (1997-2002), Cali Jackal, Cali Stone, T5, Spada NT, SP II, Spada NT, Cali 2, Cali 3, Mille GT, Strada 1000, Spada 3

Dimensions:
42mm OD for silencer, 38mm ID at downpipe end

Polished stainless steel H pipe / collector / balance pipe for models without Lambda probe. Replaces heavy catalytic converter fitted to some models and improves access for oil changes

NB this crossover does not include exhaust clamps. Also available in a satin finish. Made to order in Italy by performance experts Mistral

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

03123900 GU03123900 03 12 39 00
0312 3900 0312.3900 03.12.39.00

£105.00

INC VAT

£87.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 1 of 4

1 2 3 4