The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Daytona Centauro MGS-01 Brakes

Sort by Title

Sort by Price

Page 2 of 6

1 2 3 4 5 6

Master Cylinder Angled Input Kit PS11, PS12 & PS15

BRA19500 Fits 1100 Sport ALL, Bellagio, Centauro, Le Mans 1000, Nevada ALL, V11 Sport, V65 ALL, V35 ALL, V50 ALL, Griso 1200, Daytona, SP II, 750 SP, Strada 750, 750 Targa, Le Mans 3, Spada 3, Strada 1000, 1000S, Mille GT

Brembo kit containing replacement seal and angled elbow for connecting remote brake fluid reservoir to PS 15, PS 11 and PS 13 rear master cylinders

Also known as Brembo ref. 110312720

part in stock 3 in stock

19659500 GU19659500 19 65 95 00
1965 9500 1965.9500 19.65.95.00

£7.50

INC VAT

£6.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Long Titanium

BRA36796 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 3mm OD at base, 18mm from tip to underside of flats

Long titanium M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. M10 bleed screw used only on rear of 2003 on models.

Part of Guzzi ref. 17659260. This is a longer bleed screw than SSA36794, made exclusively for Gutsibits in titanium for maximum corrosion resistance. See BRA36795 for rubber cap

part in stock More than 5 in stock

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Pivot Pin and Nut Clutch or Brake Lever

HAA10850 Fits 1100 Sport ALL, Cali 3, Cali 1100, Cali EV, Centauro, Daytona, V11 Sport, Spada 3, Nevada ALL, Quota 1100

Dimensions:
12mm pivot OD

Pivot bolt and special nut for Brembo PS 13 and PS 16 master cylinders, also used for some hydraulic clutch lever pivot bolts

Not for early Cali 1100s fitted with solid brake lever pivot pins. Brembo ref. 110279850

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

10279850 GU10279850 10 27 98 50
1027 9850 1027.9850 10.27.98.50

£7.80

INC VAT

£6.50 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 500ml DOT 4

BRA99002 Universal Part

Dimensions:
500ml

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

part in stock More than 5 in stock

£7.92

INC VAT

£6.60 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Pad Pin Kit Brembo P32 Rear

BRA30101 Fits 1100 Sport ALL, Centauro, Daytona, V11 Sport

Brembo pad pin kit for rear Brembo P32 caliper

Also known as Guzzi ref. 20280030, mostly rear caliper applications. Brembo ref. 120280030

part in stock 1 in stock

30659101 GU30659101 30 65 91 01
3065 9101 3065.9101 30.65.91.01

Also fits Bimota DB2

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 10mm Short Stainless Steel

SSA36794 Fits Breva 750, Nevada 750 (1998-2016), V11 Sport ALL, Daytona ALL, 1100 Sport ALL, Cali EV, Cali Jackal, Cali Stone, Cali 3, Cali 1100 (1994-1997), Mille GT, T5, 1000S, Le Mans 3, Le Mans 1000, Strada 1000, Spada 3, V7 ALL, V9 ALL

Dimensions:
10mm threaded shank, 11mm across flats, 8mm OD at base, 15mm from tip to underside of flats

Stainless steel M10 bleed nipple for Brembo single bleed P2 F08 (P8) calipers on pre 1998 models. This is the same length as the genuine Brembo part BRA17659. M10 bleed screw used only on rear of 2003 on models

Part of Guzzi ref. 17659260. Some brake calipers may require a longer bleed screw, we reecommend measuring your existing screw - it should be 15mm from under the flats to the base of the tip.

part in stock 5 in stock

£8.20

INC VAT

£6.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Single Banjo Bolt M10 Stainless Steel Kit Fine Thread

BRA01001 Universal Part

Dimensions:
M10 x 1

Kit containing 2 stainless steel M10 banjo bolts for Brembo brake fittings with copper washers

Supplied with 4 crush washers. Also known as Guzzi ref. 95990033

part in stock 2 in stock

95990028-z 95990028 GU95990028 95 99 00 28
9599 0028 9599.0028 95.99.00.28

Also fits Laverda Jota

£8.40

INC VAT

£7.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 49cm

BRA00011 Universal Part

Dimensions:
49cm x 5mm x 8mm

49cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. We recommend measuring your existing pipe first to check ensure this 49cm pipe will be long enough. This is not long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£8.80

INC VAT

£7.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Lever Rubber PS13 & PS16

BRA10040 Fits Cali 3, Cali 1100 (1994-1997), Cali Jackal, Cali EV, Cali Stone, Nevada 750 (1998-2003), Spada 3, Quota 1100, Nevada 350, V11 Sport, 1100 Sport, Centauro

Cover rubber for PS 13 and PS 16 brake master cylinder lever

Brembo ref. 110353040

This part is available by special order, request a quote

27663615 GU27663615 27 66 36 15
2766 3615 2766.3615 27.66.36.15

£10.40

INC VAT

£8.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Fluid Pipe Black 99cm

BRA00012 Universal Part

Dimensions:
99cm x 5mm x 8mm

99cm length of black pipe with clips for connecting rear master cylinder to brake fluid reservoir

Brake fluid, oil and fuel resistant. This is long enough for the rear brake master cylinder on V50 II and V35 I

part in stock More than 5 in stock

£12.00

INC VAT

£10.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 6

1 2 3 4 5 6