The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares G5 Convert T3 T4 1000 SP Cali 2 Accessories

Sort by Title

Sort by Price

Page 2 of 12

1 2 3 4 5 6 7 8 9 10 11 12

Aluminium Master Cylinder Cap PS15 Brembo

BRA14102 Fits Cali 1100, Cali EV, 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 750, 850T, V7 Sport, 750S, S3

Gorgeous polished aluminium reservoir cap for PS15 Brembo master cylinder fitted to rear linked system on many models, will fit front master cylinder on models where a PS15 handlebar master cylinder is fitted. Seal is not included with this cap - you should re-use your original cap seal

Make your Guzzi stand out from the crowd!

This part is available by special order, request a quote

14661100 GU14661100 14 66 11 00
1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

£32.50

INC VAT

£27.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Battery Plate Kit Aluminium

ACA14820 Fits 850/1000 ALL Models

Dimensions:
249mm x 204mm x 5mm overall

Lightweight 5mm battery plate in a silver finish, supplied with countersunk M8 screws

This is an upgrade to the standard steel plate, perfect for your Tonti framed special (it will also fit Cali 1100 and Cali EV based specials. On some models you may need to enlarge the cut out for the speedo cable

variable availability Availability varies on this part, check availability

14418200-z 14418200 GU14418200 14 41 82 00
1441 8200 1441.8200 14.41.82.00

£45.30

INC VAT

£37.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Bevel Box Filler, Level or Cylinder Head Plug

ACA12600 Universal Part

Dimensions:
M20 x 1.5

Lightweight M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins). An aluminium filler plug made in Italy.

part in stock 1 in stock

12022600 GU12022600 12 02 26 00
1202 2600 1202.2600 12.02.26.00

£26.00

INC VAT

£21.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Big Bore Piston and Barrel Kit Low Comp 88mm Upgrade Fits 850 Crankcase

ENA18103 Fits 850 GT, 850T, T3, T4

Dimensions:
88mm bore

Complete 950cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips. Piston is low compression. This is a 950cc upgrade for 850cc models

Components for one cylinder. The barrel is designed to fit the standard crankcase aperture on 850cc bikes so it is not necessary to modify the crankcase. For the 850 GT it may be necessary to enlarge the pushrod tunnel opening in the head gasket to suit the 850 GT valve gear placement

This part is available by special order, request a quote

18060102-z 18060102 GU18060102 18 06 01 02
1806 0102 1806.0102 18.06.01.02

£311.00

INC VAT

£259.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Black Moto Guzzi Badge 60mm

LUA70128 Universal Part

Dimensions:
60mm diameter

Black and red 60mm round Moto Guzzi badge for Hepco and Becker panniers

Guzzi pannier badge.

part in stock More than 5 in stock

£13.86

INC VAT

£11.55 EX VAT this is the price you will pay if you are ordering from outside the UK

Blue LED Warning Light

ACA01012 Universal Part

Dimensions:
8mm body OD, 29mm overall

Replacement blue LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

part in stock More than 5 in stock

£3.40

INC VAT

£2.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Handlebar Master Cylinder PS13

CLA03145 Fits V7 Sport, S3, 750S, 850/1000 ALL Models, Cali 1100, Cali EV, Cali Stone, Cali Jackal, 1100 Sport ALL, Daytona, Centauro

Brembo PS 13 handlebar mounted clutch master cylinder, supplied complete with lever.

This part is available by special order, request a quote

£175.00

INC VAT

£145.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Cable Rubber Throttle Twin Pull Tommaselli

ACA14450 Fits T3 (1976-1979), Le Mans 1, Convert (1976-1979), V7 Sport, 850 GT, 750S, S3

Dimensions:
67mm x 31mm

Spare cable rubber for Tommaselli twin pull throttle assemblies ACA10501 and ACA10500

part in stock 4 in stock

£3.40

INC VAT

£2.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Clip On Handlebars Tommaselli

HAA11135 Fits V7 Sport, 750S, Le Mans 1, Le Mans 2, Le Mans 3, V65, V35C,V50C, V65C, Lario, Monza 2, Imola 2, 850T, T3, T4, G5, Convert, 1000 SP, S3, Cali 2, Mille GT (Series 1)

Dimensions:
For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp

Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube

These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder. Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors.

This part is available by special order, request a quote

£240.00

INC VAT

£200.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clock Surround Kit Polished Aluminium Drilled Mount with Ignition Switch Hole

ACA01001 Fits T3, T4, Le Mans 2, G5, Convert, 1000 SP, SP II, 850T

Dimensions:
6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres

Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:

Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
Polished aluminium instrument backs (attach with existing nuts)

Bolts to handlebar clamps, see ACA01002 for this part without drillings for the handlebar clamps

Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.

NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround. You may also need to very slightly enlarge the warning light holes

part in stock 2 in stock

£205.00

INC VAT

£170.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 12

1 2 3 4 5 6 7 8 9 10 11 12