Black brake lever for PS12 and PS15 round master cylinders. Can also be used as clutch lever on some Ducati models that have hydraulic clutches

Includes threaded preload ajuster

 1 in stock

14605650-z 14605650 GU14605650 14 60 56 50
 1460 5650 1460.5650 14.60.56.50

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda

Screw in brakelight switch for linked system proportioning valve or splitter

Screws into yoke mounted manifold for hand brake

 This part is available by special order, request a quote

 25657001 GU25657001 25 65 70 01
 2565 7001 2565.7001 25.65.70.01

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

 5 in stock

 79654116 GU79654116 79 65 41 16
 7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport Köwe, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS Köwe, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

Rubber brakelight switch cover, 90 Degree

Also known as Guzzi ref. 10352710

 1 in stock

12735100-z 12735100 GU12735100 12 73 51 00
 1273 5100 1273.5100 12.73.51.00

Kit consisting of black plastic cap and rubber cap seal for PS 12 round handlebar master cylinders and single horizontal outlet remote reservoirs (e.g. BRG19901 )

Also known as Guzzi ref. 17661052, 10271110. Brembo ref. 110430830. This is the smaller of the two round master cylinder caps used on V35, V50, V65 and 850/1000 models

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10430830 GU10430830 10 43 08 30
 1043 0830 1043.0830 10.43.08.30

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei

Brembo PS15 master cylinder cap

NB does not include rubber insert

 Sorry, this part is no longer available.

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 3 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Brembo brake master cylinder overhaul kit for overhauling foot operated PS 15 master cylinders on linked systems. Includes all seals and brake grease

This seal kit replaces Guzzi part numbers 17659350, 66139790. Brembo ref. 110273920. This repair kit also used on some Cagiva 650 Elefant models and Benelli Sei. Some Nevada 750 models use BRA14701, check your rear master cylinder before ordering. See this link for help with fitting this kit. Supercedes front kit BRA11043
Note that this kit is only for PS15 models where the piston is retained by a ring, if your master cylinder has a circlip retaining the piston then you have a PS 16 and you will need to replace the whole master cylinder - see BRA19001 for a replacement

 This part is due back in stock soon, call 01484 841395 to reserve yours

 10273920 GU10273920 10 27 39 20
 1027 3920 1027.3920 10.27.39.20

Also fits Benelli Sei, Cagiva Elefant, Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 750 Sport (1972-1974), Laverda Jota

Brembo master cylinder rebuild kit for overhauling handlebar mounted PS 15 master cylinders. Includes all seals, circlip and brake grease

This seal kit also known as Guzzi refs. 079539686, 079539632, 079539739, 079539685, 079539680 and 079539633. See this link for help with fitting this kit.

This kit has been superceded by BRA37233

 Sorry, this part is no longer available.

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Rear brake pedal operating rod, connects to lever on master cylinder. Supplied without clevis fork or adjuster nut

Brake rod

 This part is available by special order, request a quote