The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares G5 Convert T3 T4 1000 SP Cali 2 Brakes

Sort by Title

Sort by Price

Page 6 of 9

1 2 3 4 5 6 7 8 9

Brakeline Splitter To Rear Caliper Fixed Line

BRA17655 Fits 1000 SP, S3, T3, T4, 1000 SP, Mille GT, Le Mans 2, Le Mans 3, Cali 2, Convert, G5,

Dimensions:
38cm long

Rear brakeline from splitter or proportioning valve to rear caliper fixed pipe. Also used as lower front right hand pipe to caliper fixed pipe on T3

Original type rubber brakeline with chunky galvanized ends

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

17657550

£40.00

INC VAT

£33.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Brembo Brake Pads P08/F08

BRA28601 Fits Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T3, T4, T5, Cali 2, Cali 3, Spada ALL, G5, Mille GT, 1000S, Strada 1000, Cali 1100 (1994-1997), Convert, 1000 SP, V7 Sport, 750S, S3, 850 GT, 850T

Dimensions:
56mm x 54mm x 9mm overall

Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

part in stock More than 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£31.50

INC VAT

£26.25 EX VAT this is the price you will pay if you are ordering from outside the UK

Caliper Piston Set Brembo P08/F08

BRA11000 Fits 750S, S3, V7 Sport, 850/1000 ALL Models, Cali 1100 (1994-1997)

Dimensions:
38mm OD x 20mm

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

£35.00

INC VAT

£29.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Clevis Pin

GEA95265 Fits Convert, G5, Cali 2, Cali 3, Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, Spada ALL, T5, V35 ALL, V50 ALL, V65 ALL

Dimensions:
6mm OD

Clevis pin used in brake and gear change linkages, wears over time so well worth replacing on high mileage bikes

Replaces Guzzi refs. 95780265, 95780267, 95770265-Z, 95780265-Z. See BRA95227 for retaining split pin

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

95770265 GU95770265 95 77 02 65
9577 0265 9577.0265 95.77.02.65

£11.76

INC VAT

£9.80 EX VAT this is the price you will pay if you are ordering from outside the UK

Clipon Rubber

BRA39801 Fits 850/1000 ALL Models, V50

Dimensions:
18mm ID at wide end

Black 45 degree rubber cap for brakeline banjo union with master cylinder

Also used for cable exit from clip ons fitted to Le Mans 1 and Le Mans 2. Front brake light switch cover for ELA14959

part in stock 2 in stock

39663801 GU39663801 39 66 38 01
3966 3801 3966.3801 39.66.38.01

£4.20

INC VAT

£3.50 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 1L DOT 4

BRA99003 Universal Part

Dimensions:
1 litre

One litre AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3 , DOT 4 and DOT 5.1 brake and clutch fluids. If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area.

See BRA99014 for high performance alternative

part in stock More than 5 in stock

£13.75

INC VAT

£11.46 EX VAT this is the price you will pay if you are ordering from outside the UK

ENI Brake Fluid 500ml DOT 4

BRA99002 Universal Part

Dimensions:
500ml

500ml AGIP brake and clutch fluid, this is a high performance DOT 3 and 4 fluid suitable for all Moto Guzzis

Mixes safely with other DOT 3, DOT 4 and DOT 5.1 brake and clutch fluids.

See BRA99013 for high performance alternative.

If you are having problems bleeding your brakes you may need one of our one way bleed nipples BRA41651 and BRA41650

Please note this part CANNOT be posted outside of the UK mainland area

part in stock More than 5 in stock

£7.92

INC VAT

£6.60 EX VAT this is the price you will pay if you are ordering from outside the UK

Fixed Brakeline Under Tank

BRA17587 Fits 1000 SP, S3, T3, T4, 1000 SP, Le Mans 1, Le Mans 2, Le Mans 3, Cali 2, Convert, G5

Dimensions:
72.5cm long

Fixed rigid brake pipe linking front and rear of linked system, located under fuel tank

Original type rigid brake line

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

17658750

£36.00

INC VAT

£30.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Front Left Brake Pipe

BRA17950 Fits Convert, G5, S3, T3, T3 Cali

Dimensions:
Length 233mm, 15mm tip to under hex

Steel front left brake pipe with threaded connectors at each end

Rigid brake line

part in stock 3 in stock

17658950 GU17658950 17 65 89 50
1765 8950 1765.8950 17.65.89.50

£25.40

INC VAT

£21.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Front Right Brake Pipe

BRA17050 Fits Convert, G5, S3, T3, T3 Cali

Dimensions:
Length 233mm, 15mm from tip to under hex head

Steel fixed front right brake pipe with threaded connectors at each end

Rigid brake pipe

part in stock 1 in stock

17658050 GU17658050 17 65 80 50
1765 8050 1765.8050 17.65.80.50

£25.20

INC VAT

£21.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 6 of 9

1 2 3 4 5 6 7 8 9