The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop New Spares Le Mans 1 Le Mans 2 Le Mans 3 Le Mans Electrics

Sort by Title

Sort by Price

Page 9 of 13

1 2 3 4 5 6 7 8 9 10 11 12 13

Distributor Bearing

ELA14154 Fits 750S, V7 Sport, S3, 850/1000 ALL Models

Dizzie bearing

part in stock 1 in stock

£7.30

INC VAT

£6.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Condenser Marelli

SIA14786 Fits V7 Sport, 750S, S3, 850T, G5, Convert, 1000 SP, T3, T4, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, T5, Cali 2, Cali 3

Dimensions:
body measures 30mm x 18mm, lead measures 140mm

Marelli condenser with cable and mount bracket

2 required

part in stock More than 5 in stock

14715433 GU14715433 14 71 54 33
1471 5433 1471.5433 14.71.54.33

£10.50

INC VAT

£8.75 EX VAT this is the price you will pay if you are ordering from outside the UK

Condenser

ELA27435 Fits 750 Targa, Strada 750, V35 3, V35 Florida, V65 Florida, NTX 350, NTX 650, NTX 750, Nevada 750 (1991-1998), Nevada 350, 750 SP, Strada 1000, Cali 3 (Motoplat/Digiplex Equipped Only 1987-1993), Spada 3, Mille GT, 1000S, V65 GT, V35 GT

Dimensions:
20mm OD x 60mm

Ignition condenser for Motoplat systems, one required per bike

Sorry this part is no longer available Sorry, this part is no longer available.

27710435 GU27710435 27 71 04 35
2771 0435 2771.0435 27.71.04.35

this part is no longer available
Sorry this item is out of production

Coil Clamp

ELA10122 Fits 750S, V7 Sport, S3, 850/1000 ALL Models

Coil clamp for round 12 volt coils

2 required per bike. No longer available new, call us to order used coil clamps

Sorry this part is no longer available Sorry, this part is no longer available.

this part is no longer available
Sorry this item is out of production

Chrome Headlamp Complete

LIA37593 Fits V35, V50, V65, Le Mans 1, T3, T4, Convert, G5, Convert, Mille GT

Dimensions:
195mm diameter, M8 threaded mounting holes, approx 195mm between mounting holes. 13.5cm front to back, 7cm from mounting holes to rear of bowl

Complete shallow bowl 190mm chrome headlight unit. Includes a pilot / parking light. A shallow bowl makes it especially suitable for mounting on Moto Guzzis underneath the instruments

Homologated for road use.

Supplied complete with H4 bulb, pilot light and four short wires (without connectors). This headlight will fit fairing cowling FAA99575 for Le Mans 1 conversions if trim strip is not fitted to inside edge of fairing. NB mounting holes will need drilling out to 10mm if fitting T3 type indicator stems

variable availability Availability varies on this part, check availability

£88.00

INC VAT

£73.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Cable Tidy Self Adhesive

ELA10002 Universal Part

Dimensions:
Each block 20mm x 20mm

Self adhesive cable tie block for securing cables to bodywork and panels, particularly useful where cables must be kept out of the way under the rear mudguard. Simply stick block to bodywork, route cable tie through bracket on block and round wiring

Wiring clip. One block

part in stock More than 5 in stock

£0.70

INC VAT

£0.58 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Rubber Cover 90 Degree

ELA12735 Fits V35 ALL, V50 ALL, V65 ALL, 750 SP, 750 Targa, Strada 750, 850/1000 ALL Models

Rubber brakelight switch cover, 90 Degree

Also known as Guzzi ref. 10352710

part in stock More than 5 in stock

12735100-z 12735100 GU12735100 12 73 51 00
1273 5100 1273.5100 12.73.51.00

£3.20

INC VAT

£2.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Front With Screws

ELA30860 Fits Cali 1100, Cali EV (1997-2001), Cali Jackal, Cali 3, V11 Sport, Nevada 750 (1991-2003), Nevada 350, Strada 1000, 750X, T5 Polizia, Daytona ALL, 1100 Sport IE, Le Mans 1000 (1988-1994), 750T

Dimensions:
20mm x 6mm x 9mm excluding spade connectors

Brakelight switch for handlebar mounted master cylinder

Stop light switch also known as Guzzi ref. 30530526. Please compare with your existing switch to check compatibility. Can be used as a substitute for ELA27815. See ELA30861 for less expensive alternative part. Sometimes supplied with three terminals, in this instance disregard middle terminal

part in stock 4 in stock

30749860 GU30749860 30 74 98 60
3074 9860 3074.9860 30.74.98.60

£17.60

INC VAT

£14.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Light Switch Front

ELA28100 Fits Le Mans 1000 (1983-1987), T5, Lario

Dimensions:
36mm overall length

Brakelight switch for handlebar master cylinder

As this is longer available you may wish to fit BRA01004 instead

Sorry this part is no longer available Sorry, this part is no longer available.

28741100 GU28741100 28 74 11 00
2874 1100 2874.1100 28.74.11.00

this part is no longer available
Sorry this item is out of production

Brake Light Switch Fine Thread

ELA07116 Fits Le Mans 1, Le Mans 2, Le Mans 3, S3, T3, T4, T5, 1000S, 1000 SP, SP II, Spada 3, G5, Convert, Cali 3, Cali 1100 (1994-1997), Cali EV, Spada ALL, Mille GT, Nevada 350, Nevada 750 (1991-2003), V65 Florida, 750SP, Strada 750, 750T, 750 Targa

Dimensions:
M10 fine thread

Fine thread screw in brakelight switch for linked system proportioning valve or splitter. See ELA12735 for rubber cap

Stop light switch also known as Guzzi ref. 63657000

part in stock 5 in stock

79654116 GU79654116 79 65 41 16
7965 4116 7965.4116 79.65.41.16

Also fits Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 GT/Sport K�we, Ducati 750 Paso (1984-1992), Ducati 750 Sport, Ducati 750/900 SS K�we, Ducati 750 F1/Laguna Seca, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR-I, Ducati 900 SS (1990), Ducati 906 Paso (1988), Ducati 1000 MHR-2/S2

£21.40

INC VAT

£17.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 9 of 13

1 2 3 4 5 6 7 8 9 10 11 12 13