Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

 4 in stock

 14933000 GU14933000 14 93 30 00
 1493 3000 1493.3000 14.93.30.00

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

 4 in stock

 14933000 GU14933000 14 93 30 00
 1493 3000 1493.3000 14.93.30.00

Replacement regulator rectifier for models fitted with the Ducati charging system. This is a quality unit and is supplied with fitting instructions

Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black ring, 1 x red ring. You will need to reuse your existing block connectors to connect this to your loom. See this wiring diagram for wiring connections

 1 in stock

37703805-z 37703805 GU37703805 37 70 38 05
 3770 3805 3770.3805 37.70.38.05

Black spark plug cap, this does not include the 90 degree bend or HT lead but is significantly cheaper than the genuine part

For models with 4 valves per cylinder, with the very easily damaged internal plug caps.
Also known as suppressor cap.
NOT for models with 2 valves per cylinder. See ELA18134 for HT leads, although these come with different plug caps.

 2 in stock

 883028 MG883028

Pivot bolt for gear and brake pedals

Lever bolt also known as 884033

 1 in stock

AP8121223

Also fits Aprilia 1000 RSV4 R APRC , BJ 2013 - 2014, Aprilia 1000 RSV4 RF , BJ 2017 -, Aprilia 1000 RSV4 RR , BJ 2015 - 2017, Aprilia 1100 Tuono V4 Factory , BJ 2015 -, Aprilia 1200 Caponord Rally , BJ 2015 - 2017, Aprilia 125 Tuono , BJ 2017 -, Aprilia 750 Shiver , BJ 2014 - 2017

Black plastic alternator cover with Moto Guzzi in white text

See ACA18650 for polished aluminium alternator covers

 1 in stock

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   2 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   2 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head

Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 More than 5 in stock

 887483 MG887483

Premium softstyle grey T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 More than 5 in stock