Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts for round and square barrel engine rocker covers. Only one kit required per engine
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070). This kit is for models without billet rocker cover protectors fitted, for models with rocker cover protectors see SSA80015. This kit will suit a V11 with standard rocker cover protectors which are much thinner than aftermarket types.
See SSA81522 for rocker cover trim retaining screws on 2v/cyl CARC models, these are not included with this kit.
More than 5 in stock
£9.00
INC VAT
£7.50 EX VAT
Sump bolt kit containing all replacement stainless steel socket cap bolts for models without a sump extension fitted
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)
More than 5 in stock
£10.00
INC VAT
£8.33 EX VAT
Top end gasket and seal set containing rocker cover, base, head and exhaust gaskets plus top end O rings
Top end gasket set for one cylinder. Inlet manifold gasket FUA19115 available separately
4 in stock
£21.00
INC VAT
£17.50 EX VAT
Full service kit for single throttle body models containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK CPR8EB-9 spark plugs, 2 x rocker cover gaskets and all crush washers and O rings to complete a service on your bike
Save £'s by buying everything in a service kit
The oils you need are 2 x OIA01051 1 x OIA08194 + 1 x OIA08193. Order service oil kit OIA28001 if you require oil with your service parts. See FUA01090 for fuel filter
More than 5 in stock
£62.00
INC VAT
£51.67 EX VAT
Full seal kit and gasket set for overhauling the rear drive box
Bearings available separately
More than 5 in stock
£28.00
INC VAT
£23.33 EX VAT
Full gearbox seal kit and gasket set for overhauling 5 speed gearboxes on big twins
Bearings available separately and as kit GEA92000
4 in stock
£42.00
INC VAT
£35.00 EX VAT
Screw kit containing 28 replacement stainless steel socket cap bolts for timing cover, inlet manifolds and sump pan. Only one kit required per engine. See SSA87983 and SSA89291 for special rocker cover screw kits
To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070).
Add a bit of sparkle to your V7!
More than 5 in stock
£12.00
INC VAT
£10.00 EX VAT
Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK CPR8EB-9 spark plugs, crush washer and filter cover O ring to complete a service on your bike. See FUA01090 for fuel filter
Save £'s by buying everything in a service kit
Guzzi approved ENI oils and lubricants available separately. The oils you need are 2 x OIA01051 for the engine
More than 5 in stock
£50.00
INC VAT
£41.67 EX VAT
Exhaust stud kit consisting of 4 x titanium studs, 4 x stainless dome head nuts and 4 x stainless wavy washers
The mild steel exhaust studs fitted to modern Guzzis are notorious for corroding in place. Replace yours now with these corrosion resistant parts to ensure you can remove your exhaust in years to come
More than 5 in stock
1A003632R
£22.00
INC VAT
£18.33 EX VAT
1 litre of Agip SAE 10W fork oil. Eni Fork Oil 10W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use. The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 5W also available, use a combination of 5W and 10W to tune your damping more precisely
Eni Fork Oil 10W is equipped with appropriate rheological features such as low temperature fluidity, high viscosity index and a very low sliding point, which results in smooth and uniform suspension behavior in a wide range of temperatures.
This product is characterized by high anti-wear properties, which ensure high protection and long service life to the lubricating parts.
The corrosion-resistant properties of Eni Fork Oil 10W allow effective protection of surfaces against corrosive phenomena.
Eni Fork Oil 10W has the necessary properties for the correct operation of the lubricated equipment, such as low foaming, low air retention, stability in hot conditions, and compatibility with rubber materials (gaskets).
Please note this part CANNOT be posted outside of the UK mainland area. ENI oils were previously sold under the AGIP name
More than 5 in stock
GU30530527
£14.00
INC VAT
£11.67 EX VAT