Small aluminium centrestand bush. This is the bush that the short M10 mount bolts bolt through

Two required per stand

 2 in stock

 14433500 GU14433500 14 43 35 00
 1443 3500 1443.3500 14.43.35.00

90 degree angle drive box for speedo and tacho cables, screws into rear of clock

Fits all 850/1000 models. Also known as cable gearbox

 3 in stock

 17768360 GU17768360 17 76 83 60
 1776 8360 1776.8360 17.76.83.60

Inlet rubber with HT lead guide. Fits between inlet manifold on cylinder head and throttle body or between throttle body and airbox

Also known as Guzzi ref. 03114370, 29114360. Use clip SSA45970.


Please note that if you are fitting this as a replacement to FUA30470 you may need to make some modification to the end of your airbox nozzle for a secure fit

 5 in stock

 30114370 GU30114370 30 11 43 70
 3011 4370 3011.4370 30.11.43.70

Pair of Givi crash bars finished in black. The heads and rocker covers are vulnerable on these bikes and can be badly damaged by even a minor accident, replacement cost can be more than £1000 so protect your bike with these bars.

Supplied with fitting hardware and instructions.

 1 in stock

Brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals and O ring to seal the two halves together

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

 More than 5 in stock

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Modern solid state electronic regulator for models with Bosch charging system

Bolts to original mounting point but this replacement part is not as tall as the old metal regulator. Also known as Guzzi ref. 17703800. Replaces ELA29704

See our Bosch fault finder page for help diagnosing problems on your Bosch charging system. The original type mechanical regulator is no loger available

 3 in stock

29703800-z 29703800 GU29703800 29 70 38 00
 2970 3800 2970.3800 29.70.38.00

Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.

NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722

 2 in stock

 20391310 GU20391310 20 39 13 10
 2039 1310 2039.1310 20.39.13.10

Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)

Pair of Brembo 07BB1408 carbon ceramic brake pads for Brembo P2 F08 (P8) calipers

For P08/F08 calipers. Front and rear pads for all models except P9 equipped Spada where these are only for front calipers

 More than 5 in stock

28654601-z 28654601 GU28654601 28 65 46 01
 2865 4601 2865.4601 28.65.46.01

Also fits Benelli 354 Rear, Benelli Sei Fronts, Ducati 250/350/450 Desmo Fronts (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso Fronts (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2 Fronts, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 RGS Corsa Rear, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 Fronts (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Rotor bolt for Bosch alternator

Not previously available from Guzzi. May also be used on a Saprisa alternator

 3 in stock

 14712459 GU14712459 14 71 24 59
 1471 2459 1471.2459 14.71.24.59

Stainless steel tool for removing Bosch alternator rotor. Will also fit Saprisa.

Simply screw in until the rotor pops off

 5 in stock

Also fits Benelli Sei 900 (Series 2)