Air filter, flat paper cartridge type

See SIA10425 for a reusable performance air filter

 More than 5 in stock

AP8104242

Black spark plug cap, this does not include the 90 degree bend or HT lead but is significantly cheaper than the genuine part

For models with 4 valves per cylinder, with the very easily damaged internal plug caps.
Also known as suppressor cap.
NOT for models with 2 valves per cylinder. See ELA18134 for HT leads, although these come with different plug caps.

 2 in stock

 883028 MG883028

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   3 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÜV Rheinland.
  See BRA41652 for bleed valve cover

   3 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]

Fork seal

2 required per pair of forks, no need to stack two seals per leg. Replaces Guzzi refs. 90403447, 90403448, 90403546

 More than 5 in stock

 90403449 GU90403449 90 40 34 49
 9040 3449 9040.3449 90.40.34.49

Also fits Gilera Runner, Benelli Sei 900

Brembo caliper cover for models with obsolete twin bleed calipers

P9 caliper cover includes cutout each side for bleed nipple. Also known as Guzzi ref. 14654700, 17654760. Please note you may need to trim away the four moulded lugs at the bottom of the cover otherwise these may clash with your pad pins

 More than 5 in stock

 20325410 GU20325410 20 32 54 10
 2032 5410 2032.5410 20.32.54.10

Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head

Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 More than 5 in stock

 887483 MG887483

Premium softstyle royal blue T-shirt printed with classic Moto Guzzi logo in white on the chest.

Rear of shirt features our 'What do you mean you've only got one neutral'?! design - Guzzi riders know all about this!

Sizing:

• S fits 34 - 36" chest
• M fits 38 - 40" chest
• L fits 42 - 44" chest
• XL fits 46 - 48" chest
• XXL fits 50 - 52" chest

 More than 5 in stock

Fork seal

2 required per pair of forks, no need to stack two seals per leg. Replaces Guzzi refs. 90403447, 90403448, 90403546

 More than 5 in stock

 90403449 GU90403449 90 40 34 49
 9040 3449 9040.3449 90.40.34.49

Also fits Gilera Runner, Benelli Sei 900

Fibreglass triangular V7 Sport style side panel. Supplied unpainted, undrilled and without fixings. Ideal for the home special builder

Designed for early Tonti frames but may fit other models after appropriate modifications have been made. Two panels required per bike

 More than 5 in stock