Sump bolt kit containing all replacement stainless steel socket cap bolts

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070)

 More than 5 in stock

1 litre of Agip SAE 15W fork oil, lighter weight than standard on most Guzzi models. Eni Fork Oil 15W is a product designed for the motorcycle industry designed and developed for use in forks and shock absorbers, suitable for both road and off-road use.

As recommended by Guzzi. One litre will refill both forks on most models, check your manual for exact quantity required. 10W also available, use a combination of 10W and 15W to tune your damping more precisely

Please note this part CANNOT be posted outside of the UK mainland area. It is also possible to obtain intermediate grades by mixing with other Fork Oil grades. ENI oils were previously sold under the AGIP name

 More than 5 in stock

Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, crush washer and filter cover O ring, drain and level plug seals to complete a service on your bike

Save £'s by buying everything in a service kit

Guzzi approved ENI oils and lubricants available separately. The oils you need are 2 x OIA01051 for the engine or save time and money by ordering our service oil kit OIA85001. See SIA85888 for the long life spark plugs

 5 in stock

Kit containing 4 Litres of Millers ZFS 4T SAE20W-50 synthetic engine oil and 1 litre of Extreme Pressure gearbox and drivebox oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil on models with conventional tappets

Please note this kit CANNOT be posted outside of the UK mainland area

 4 in stock

Kit containing 2 Litres of ENI i-Ride Racing SAE10W-60 synthetic engine oil, 1 litre of Extreme Pressure gearbox oil and 1 litre of final drive oil for mk 1 V7 and Breva 750 models. This kit contains all the oils you will need to change your engine, drive box and gearbox oil

Please note this kit CANNOT be posted outside of the UK mainland area

 1 in stock

Kit containing 8 long titanium shouldered retaining screws for your rocker covers. Upgrades the poor quality OE screws with shiny Ti parts

Rocker cover bolt kit for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 More than 5 in stock

 887483 MG887483

Rocker cover screw kit containing 16 replacement stainless steel socket cap bolts. Only one kit required per engine

To ensure you can easily release these fasteners in years to come we recommend wiping each fastener with copper grease (OIA11070).
See SSA81522 for rocker cover trim retaining screws, these are not included with this kit.

 This part is due back in stock soon, call 01484 841395 to reserve yours