1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec
Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004
More than 5 in stock
£8.50
INC VAT
£7.08 EX VAT
Sealed ball bearing used as rear wheel bearing for cast and spoked wheels
2 bearings required per wheel. Also used as front wheel bearing in spoked wheels on these models: Cali 1100, S3, T3, G5, Mille GT, Cali 3, Convert, Strada 1000, 1000S, Cali Jackal, Cali Stone, Cali Special (tube rim), Cali Vintage (tube rim), Cali Classic (2006-2007), 850 GT (disc braked version). Front wheel only for 750S / V7 Sport.
More than 5 in stock
92204220-z 92204220 GU92204220 92 20 42 20
9220 4220 9220.4220 92.20.42.20
£10.00
INC VAT
£8.33 EX VAT
Front wheel bearing, sealed
2 bearings required per wheel, Also used as rear wheel bearing on V7 850
More than 5 in stock
92204221 GU92204221 92 20 42 21
9220 4221 9220.4221 92.20.42.21
£10.80
INC VAT
£9.00 EX VAT
Bearing used as UJ carrier bearing on pre 2007 models (see TRA90062 for retaining circlip). Used as outer crownwheel carrier bearing on CARC units
5 in stock
92204230 GU92204230 92 20 42 30
9220 4230 9220.4230 92.20.42.30
£14.40
INC VAT
£12.00 EX VAT
Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes
Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549
More than 5 in stock
90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48
£18.50
INC VAT
£15.42 EX VAT
Rear crankcase oil seal or rear main oil seal.
Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch
More than 5 in stock
90405367-z 90405367 GU90405367 90 40 53 67
9040 5367 9040.5367 90.40.53.67
£14.00
INC VAT
£11.67 EX VAT
High pressure black fuel line / fuel line, can be used to replace fuel line on other models with 6mm ID fuel lines
This high pressure fuel hose is rated to 225 PSI. It has been designed for use with Modern Chemically Aggressive Bio-Ethanol Enriched Petrol Formulations (E5 & E10) As per currently served petrol pump petrol. Confirms to SAE J30 R7 and BS AU 108. See FUA00004 for hose clips
4 in stock
AP8144069
£8.80
INC VAT
£7.33 EX VAT
Swing arm taper roller bearing
2 races required per bike, supercedes unsealed bearing Guzzi ref. 92249217 and 92249216. See TRA90434 for oil seals
More than 5 in stock
92249213 GU92249213 92 24 92 13
9224 9213 9224.9213 92.24.92.13
£18.80
INC VAT
£15.67 EX VAT
Sealed bearing used as rear wheel bearing on some models
1 only required for rear wheel bearing applications
3 in stock
92204218-z 92204218 GU92204218 92 20 42 18
9220 4218 9220.4218 92.20.42.18
£10.50
INC VAT
£8.75 EX VAT
Valve guide
Also known as Guzzi ref. 13036800, 13036900, 13036700, 14036860, 13036801. See ENA90353 for valve guide circlips
More than 5 in stock
14036860 GU14036860 14 03 68 60
1403 6860 1403.6860 14.03.68.60
£14.90
INC VAT
£12.42 EX VAT