Dellorto 8.5g float with tang for needle valve
Most Guzzi big twins originally had 10g floats- see FUA14001
3 in stock
14933000 GU14933000 14 93 30 00
1493 3000 1493.3000 14.93.30.00
£22.50
INC VAT
£18.75 EX VAT
Standard grey tinted screen for headlamp fairing. Includes screen edge trim.
Fitting kits available separately. Screen fasteners are FAA98417 x 3, FAA04001 x 6, FAA90035 x 3, FAA92104 x 3
2 in stock
14577250-z 14577250 GU14577250 14 57 72 50
1457 7250 1457.7250 14.57.72.50
£54.00
INC VAT
£45.00 EX VAT
Gearbox locknut, one nut fitted to each end of the layshaft
1 in stock
10054100 GU10054100 10 05 41 00
1005 4100 1005.4100 10.05.41.00
£11.50
INC VAT
£9.58 EX VAT
Black rubber UJ boot / gaiter
See TRA23101 for clip
2 in stock
23548080-z 23548080 GU23548080 23 54 80 80
2354 8080 2354.8080 23.54.80.80
£14.00
INC VAT
£11.67 EX VAT
Throttle cable from Handlebar splitter to carb, one cable per carb. For models with standard high top PHF pumper carbs.
Only suitable for 1988 on Le Mans 4 & 5 models. We advise you to measure your existing cable before ordering in case you have a non standard set up.
3 in stock
28117778 GU28117778 28 11 77 78
2811 7778 2811.7778 28.11.77.78
£14.00
INC VAT
£11.67 EX VAT
Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.
1 in stock
Sorry this item is out of production
Lever peg for Tarozzi rearset brake and gear levers. Accepts black rubber ACA11601
M8 threaded mounting
2 in stock
£8.70
INC VAT
£7.25 EX VAT
Complete black tail light unit with number plate light and reflector made by SIM, suitable for pre 1979 models
Back plate for tail lamp is black plastic, not chrome as on the discontinued original. NB does not include leads or bulbs (requires 1 x LIA11200 and 1 x LIA12010 ).
2 in stock
17740900 GU17740900 17 74 09 00
1774 0900 1774.0900 17.74.09.00
Also fits Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 900 Darmah, Ducati 900 MHR-I, Laverda Jota (Series 2) Morini 350 Sport, Morini 350 Strada, Morini 500
£32.00
INC VAT
£26.67 EX VAT
Black rubber UJ gaiter / boot, clips available separately
Also known as 883966
See TRA93304 for securing clips
1 in stock
05548030 GU05548030 05 54 80 30
0554 8030 0554.8030 05.54.80.30
£19.00
INC VAT
£15.83 EX VAT
A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple
Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap
More than 5 in stock
Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,
£8.00
INC VAT
£6.67 EX VAT