Left hand fuel tap with fuel level sensor

Two pin connector block for fuel sender

 Availability varies on this part, check availability

 31105460 GU31105460 31 10 54 60
 3110 5460 3110.5460 31.10.54.60

Tool for crankshaft timing sprocket nut, this is a superior design tool intended for repeated use. Use for clutch centre nut on V11 Sport. Will not reach timing sprocket nut on models with Ducati charging system.

Also fits swingarm spindle nut on Stelvio.

Half inch socket drive

 Availability varies on this part, check availability

 18927651 GU18927651 18 92 76 51
 1892 7651 1892.7651 18.92.76.51

Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.

Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions. Suitable for all models originally fitted with points which have a mechanical advance / retard . Can also be fitted to Strada 1000, Spada 3, Cali 3 etc... if the distributor is swapped for a points type part with advance / retard mechanism. Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101

Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:

1. An ADAPTOR plate which mounts the lamps supplying the beam of infra-red light. This is broken by the ROTOR as it rotates on the engine cam or crankshaft. When a beam of light is re-made as the rotor blade clears the beam the switching unit is instructed to fire the coil (please note some systems will have separate mounting plates for each lamp and will not be assembled on a single plate as shown.) In many kits these are supplied as 1 lamp per cylinder. Other kits use a wasted spark system with 1 lamp firing 2 cylinders. The adapter kit also includes the parts needed to fit the lamps around the motorcycle cam or crankshaft - usually supplied as a base plate and /or segment plates with pre-mounted lamps.
2. A ROTOR which fits on the bike cam or crankshaft and makes and breaks the lamps infrared beam when the coil is to be fired. The rotor may be made of metal or a heat and solvent resistant plastic.
3. A SWITCHING UNIT which collects coil firing instructions from the rotor traversing through the lamps and fires the coil. The switching units are supplied positive or negative earth depending on the bike configuration and have a separate switching channel for each lamp in the Adaptation Kit. 12V and 6V versions are also available especially for earlier bikes. The switching unit has an integral timing light for each coil and is fully compatible with existing systems to the older design. It is also a direct replacement for Piranha switching units.
4. An INSTALLATION WIRING LOOM is supplied with each kit, tailored to the original bike loom dimensions, connectors and wire colours for a quick, easy and professional looking installation.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Pair of organic EBC FA256 rear brake pads for Hengtong caliper used on 2012 on models

Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248

 2 in stock

AP8133798

Rebuild kit for Brembo rear caliper. This is a comprehensive overhaul kit containing dust seals, fluid seals, o ring, bleed nipple, and dust cap

Caliper seal kit

 This part is available by special order, request a quote

Workshop manual supplement Le Mans 4 & 5 (Use 850/1000 Core Manual BOA17921). This supplement is designed to be used with the core 850/1000 manual, the supplement covers specific changes made for the Le Mans 4 & 5.

n.b. These are comb bound reprints

 1 in stock

Pair of reverse cone stainless steel performance silencers from Agostini. The polished finish reverse cone design compliments the classic styling of the V7 models, the silencers are shorter than the original silencers. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding pair of silencers.
4kg lighter that stock silencers
Benefit from increased power and torque
Release the music in your Guzzi!

Euro 5 compliant
No remap required
No remapping required

Pair of Agostini Mandello short pipe style silencers specifically designed for Moto V7 850 in stainless steel and customized with the laser engraved Agostini Mandello del Lario logo.

These silencers are specially designed to be mounted directly on the attachment points of the original silencers without the need for any modification; They are also expressly designed to enhance the performance of the Mandello twin cylinders. On all the models for which they are designed, they guarantee an increase in performance and a lowering of the rpm at which maximum power is obtained, allowing the bike to breathe much better at all rpm.

All silencers are equipped with a removable dbkiller.

Inside the packaging there are instructions and the certificate of approval

 Availability varies on this part, check availability

Round plastic bulb holder for instrument warning lights.

Supercedes Guzzi ref. 10754905. For bulb LIA93140

 Availability varies on this part, check availability

 19768680 GU19768680 19 76 86 80
 1976 8680 1976.8680 19.76.86.80

Full service kit containing 1 x UFI oil filter, 1 x UFI air filter, 2 x NGK BP6ES spark plugs, 2 x sump gaskets, 2 x rocker cover gaskets and all crush washers to complete a service on your bike.

Save time and hassle by ordering service oil kit OIA14001 with your service kit

Save £'s by buying everything in a service kit

For models with points see SIA18001. Oils and lubricants available separately. The oils you need are 1 x OIA11036 and 1 x OIA08194

 More than 5 in stock

Full service kit containing 1 x UFI oil filter, 2 x NGK BP7ES spark plugs, 1 x sump gasket, 2 x rocker cover gaskets and all crush washers to complete a service on your round barrel Le Mans with electronic ignition.

Save time and hassle by ordering service oil kit OIA14001 with your service kit

Save £'s by buying everything in a service kit

For models with points see SIA14003, if you have a deep sump you'll need an extra sump gasket (ENA14036). Oils and lubricants available separately. See ENA95006 for gauze oil filter tab washer. The oils you need are 1 x OIA11036 and 1 x OIA08194

 More than 5 in stock