NGK Iridium DR9EIX high performance spark plug
Due to the properties of Iridium, the spark plugs centre electrode can be made with a much smaller diameter than with platinum, Gold or gold palladium and copper/nickel types without sacrificing service life. See TOA00014 for spark plug spanner
2 in stock
£18.80
INC VAT
£15.67 EX VAT
Full workshop manual for ABS equipped V7 III models covering maintenance, overhaul and detailed repair. Note that this manual does not include detailed engine overhaul
Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint
Order now and we will post your order within 7 days.
2Q000297
£35.00
(VAT exempt)
£35.00 EX VAT
Workshop manual for V85 TT models covering maintenance, overhaul and detailed repair. Note that engine overhaul is covered in a separate supplement - BOA85383
Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint
This part is due back in stock soon, call 01484 841395 to reserve yours
2Q000400
£32.00
(VAT exempt)
£32.00 EX VAT
Screw in plastic dipstick for models with sump extension fitted. Uses O Ring ENA90706
base of flange to end measures 162mm
This part is due back in stock soon, call 01484 841395 to reserve yours
30004910-z 30004910 GU30004910 30 00 49 10
3000 4910 3000.4910 30.00.49.10
£11.00
INC VAT
£9.17 EX VAT
Stainless steel exhaust cover for the exhaust link pipe and CAT. Fits easily to the standard exhaust system to improve the styling of the V100. This brushed stainless finish cover also helps shield your feet from the heat of the CAT. Note that this accessory is not compatible with a centre stand.
A quality accessory hand made in Italy for your V100
This part is due back in stock soon, call 01484 841395 to reserve yours
£60.00
INC VAT
£50.00 EX VAT
HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM
This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10433 and V-Twin Boost - ACA85001 or ACA85002.
Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.
This part is due back in stock soon, call 01484 841395 to reserve yours
£140.00
INC VAT
£116.67 EX VAT
Pair of open ended black rubber handlebar grips to replace standard fitment
Sorry, this part is no longer available.
03603560 GU03603560 03 60 35 60
0360 3560 0360.3560 03.60.35.60
Sorry this item is out of production
Plastic inlet manifold, replaces unavailable aluminium manifold. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. PHF36 carb mounts direct to this manifold (no inlet manifold rubber required)
Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts
This part is available by special order, request a quote
£45.00
INC VAT
£37.50 EX VAT
Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHM 40 carb conversions on models previously fitted with smaller carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)
Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts
This part is available by special order, request a quote
£45.00
INC VAT
£37.50 EX VAT
Full workshop manual for 4 valve Griso 1200 models covering maintenance, overhaul and detailed repair
Includes tolerances for many parts. This is a comb bound reprint
1 in stock
854378 MG854378
£30.00
(VAT exempt)
£30.00 EX VAT